
Avery Weigh-Tronix WI-150 ultra low
power weight indicator

Avery Weigh-Tronix
WI-150 Indicator Features & Benefits
Factory Mutual approved
-The Avery Weigh-Tronix WI-150 Weight Indicator has been tested and accepted
for hazardous environments including the following location
classifications: Class I (gases), Divisions I and II; Groups A, B, C,
and D; Class II (dusts), Divisions I and II, Groups E, F and G; and
Class III (fibers), Divisions I and II.
Versatile
- The Avery Weigh-Tronix WI-150 can operate from a BP-150 Battery Pack
or from a PS-150 AC to DC Power Supply with barrier located in a safe
area. Use the indicator for simple scale operations or link it with
computers, printers and other data-gathering devices.
Front panel configuration
- All calibration and programming is done through the front panel.
Menu driven
- Simplifies the operation of the Avery Weigh-Tronix WI-150. Just press the
MENU key and cycle through the available function choices. Adapt the
menu to your operation during configuration. Select only the options you
want to appear under MENU key.
Security code
- Protects configuration, calibration, and user data from unauthorized
tampering.
Selectable units of measure
- Configure the Avery Weigh-Tronix WI-150 to measure in pounds, kg, or even
gallons with programmable density.
Selectable tare operation
- Select pushbutton tare and/or up to 10 keyboard tare registers.
Battery saver
- Low-power A to D converter for the battery pack version. Conserves
battery life with one-eighth duty cycle load cell drive.
Sleep mode
- Extends battery life on battery pack versions. Programmable for
virtually any interval of scale idleness.
Battery backed up RAM
- Protects tare and pushbutton zero information. EEPROM stores
configuration and calibration data.
Avery Weigh-Tronix
WI-150 Indicator Options
Fiber optics data interface card
- Installs in the WI-150 Indicator to facilitate transmission of signals
through a fiber optics cable to receiving circuitry in a safe area.
Includes time and date.
Print formatting
- Customize your printout with company name, message, character size and
location, etc. right from the indicator.
Heavy-duty swivel mounting stand
- Adjust the display quickly to the best sight line.
RFI protection
- It provides stable weight readings in environments with moderately
high levels of RFI radiation.
Avery Weigh-Tronix WI-150
Indicator Specifications
Enclosure
NEMA 4X, water-tight, stainless steel 7-3/4" high x 9-1/8" wide x 6"
deep (19.6cm x 23.2cm x 15.2cm)
Display
7-segment LCD, 8 digits, 1.0" high with 10 annunciators
Capacities
Programmable to any number between .00001 and 999,999
Hazardous location classifications
Class I, Divisions I and II, Groups A, B, C and D; Class II,
Divisions I and II, Groups E, F and G
Class III, Divisions I and II
Entity parameters
Vmax = 19 V, Imax= 450 mA, Ci - 0.24 uF, Li- 0 mH
Display rate
Selectable to 1, 2, or 5/second
Accuracy
Span: +5.0 ppm/°C
Zero: +0.66 uV/°C (-10 to 40°C)
Span: +10 ppm/°C
Zero: +0.13 uV/°C (-30 to 60°C)
Linearity
+0.005% of capacity, maximum
Repeatability
+0.005% of capacity, maximum
Hysteresis
0.005% of capacity, maximum
Voltage requirements
+5.6 to 13.5 volts DC
Resolution
Sealable to 10,000 divisions.
Higher resolutions available
Increments
Programmable to any size between .00001 and 20,000 lb/kg
Controls
MENU, PRINT/SELECT, TARE, GROSS/NET, UNITS, ZERO/CLEAR, ON, OFF
Annunciators
Gross, Tare, Net, Low Bat, Motion, Print, gal, lb, kg, Zero
Excitation
Drives up to eight 350 ohm
Weigh Bars or twenty two
1000 ohm Weigh Bars
Environment
-10° to 40°C (14° to 104°F)
10 to 90% relative humidity
Shipping weight
14 lb (6.4kg)
Specifications subject to
change without notice.
Call 513-984-2101
or 800-446-1991 for the RACO Discount Price!