Avery Weigh-Tronix Checkpoint M-NH checkweigher with IP66, NEMA 4x for accurate mid-range checkweighing in extreme production environments, designed for frequent cleaning with high-pressure water jet, protected from steam and harsh chemicals and corrosives

AVERY WEIGH-TRONIX

Avery Weigh-Tronix Checkpoint M-NH checkweigher

Avery Weigh-Tronix Checkpoint M-NH checkweighers
The Avery Weigh-Tronix Checkpoint M-NH satisfies the need for accurate mid-range checkweighing in extreme production environments. It is designed for frequent cleaning with high-pressure water jet and is protected against the corrosive effects of steam and harsh chemicals.

Whether checking current nominal weight or sorting and classifying, the Avery Weigh-Tronix Checkpoint M-NH will reliably meet your application requirements with speed and efficiency.

The Avery Weigh-Tronix Checkpoint M-NH has a welded support structure fabricated from heavy-walled, stainless steel tubing upgraded to IP66/NEMA 4X. The entire frame is covered with polished 316 stainless steel sheet metal to form a smooth, crevice-free enclosure with sloping surfaces for easy cleaning and superior water resistance. The Weigh Cell and conveyor drive motors are fully contained within this enclosure. For additional protection, the Weigh Cell and photocell are encapsulated within their own housings, and the conveyors are equipped with chemical resistant sealed bearings. Electrical connections are also designed to ensure the water-tight integrity of the entire structure.

Individually modified solutions for varying product shapes are easily accommodated. Spring-loaded rollers allow easy belt exchange without tools.

Standard configuration

Welded stainless steel (AISI 316) tubular frame with stainless steel control cabinet and operating column (IP66/NEMA 4X)

Integrated display/control system with 5.7" graphical touch screen

2 transport conveyors (in feed and weighing)

1 set - operator/maintenance manual, electrical and pneumatic drawings, spare parts catalog

The Checkpoint M-NH is available with a built-in printer or data storage system, sorting devices and a wide range of additional options for enhanced performance.

Operational Features

100% production monitoring of products to ensure they meet the minimum weight or average weight requirements with production documentation

Rejection of out-of-tolerance products via optional flap conveyor or diverter gate

Production documentation shown by means of graphic screens for statistics histogram, trend and average value curves by pieces, hours or minutes. 2 different weighing ranges

5 weight classes for under, accept and over classification

50 PLUs (incorporates all relevant information required for the assigned product)
Touch screen simple, menu-guided operation

Multi-level password protection

3 different working height ranges

Right to left or left to right working directions

Simple belt and conveyor change, no tools required

Maintenance-free servo drive includes motor and electronics

Compact design for easy integration into production lines

Line synchronization with isolated relay contacts

Remote start (input)

Weighing mode (output)

Error (output)

20 automation channels available: eight input and 12 output channels

Main power switch located on electrical cabinet

Photo cell for product recognition (fully enclosed in a waterproof housing for complete protection)

Simple menu-driven calibration

AutoZero tracking capabilities

Tare weight input for checking net weights

Standard statistics including totals, over/under weights, standard deviation, average, etc.

Bubble level on frame for accurate machine leveling

Emergency by-pass for "worst-case scenario" resets the checkweigher to "product transport with the last selected speed" - Production can continue uninterrupted and the weight check can be performed at a later time

Add-on capabilities for even greater application flexibility

The basic model of the Checkpoint M-NH covers an extraordinarily wide and versatile spectrum of applications. This versatility is supplemented by many selectable options.

The Checkpoint M-NH can be equipped with a mean value control (MVR-1). This feature allows the control of automated filling machines. It is a valuable tool to reduce and/or eliminate inefficient overfilling. The production tendency can be graphically represented.

When integrated into a production line, the Checkpoint M-NH can be started by remote-control using the line synchronization of a higher line control.

By the integration of additional safety components, all drives as well as the pneumatics can be operated off circuit (optional feature). In order to ensure that products which are out of tolerance are rejected, a rejection verification is available. A photo sensor located downstream from the sorting device monitors the actual product flow and, if necessary, stops the belts immediately. With the extensive range of optional equipment, the Checkpoint M-NH can be easily adapted for specific application requirements.

Specifications subject to change without notice.

* Each PLU incorporates all relevant information required for the assigned product.

Call 513-984-2101 or 800-446-1991 for the RACO Discount Price!

Back to Weigh-Tronix main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!