Avery Weigh-Tronix E1005 indicator is ideal for bench scales, floor scales, and tank weighing applications, high contrast display allows operator to easily view weights at a glance

AVERY WEIGH-TRONIX

Avery Weigh-Tronix E1005 indicator

Avery Weigh-Tronix Model E1005 is ideal for bench scales, floor scales and tank weighing applications. The high contrast display allows the operator to easily view weights at a glance. Weighments can be accumulated, stored and recalled including number of transactions.

Avery Weigh-Tronix E1005 indicator Specialized Applications
Checkweighing
Counting routines
Peak weight
Process control

The Avery Weigh-Tronix Model E1005 can serve as a remote display in applications where weights must be read in two locations.

An internal battery provides mobility for cart-mounted bench scales or for applications where AC power is not available.

Weight information can be transmitted to peripheral printers and/or computers through the indicator’s communication port. The format of the information may be customized and can include time and date.

An IP54 rated enclosure ensures reliable, continuous operation in dusty environments.

Avery Weigh-Tronix E1005 indicator Specifications:

5 volts excitation

Supports up to four 350-ohm weight sensors

2 to 5 calibration points stored

Seven-digit, seven-segment, 0.75-inch high, LCD display

Analog to digital conversion rate of 60 times per second

Internal resolution of 41,248,140 counts per mV/V per second

Standard inputs - Three logic level inputs for: Zero, Print, Tare,Units, F1

Standard outputs -

Three cutoff outputs, open collector design

Serial port RS-232 or 20mA current loop, orRS-422, or RS-485

Serial command inputs - Programmable serial response to ASCII character input, SMA protocol

Avery Weigh-Tronix E1005 indicator Specifications

Power requirements
120 volts AC, 60 Hz, 800mA
Internal battery: 25 hours of continuous operation with one weight sensor; 15 hours of continuous operation with four weight sensors
Standby mode extends battery life

Excitation
5 volts
Supports up to four 350ohm weight sensors

Analog signal input range
+/- 12 mV/V

Analog signal sensitivity
0.2 μV/divisions minimum
1.0 μV/divisions recommended

Calibration
2 to 5 points stored

Operational keys
Tare, Select, Zero, Print, Units, F1, On/Off

Operational annunciators
Center of Zero, Motion, Gross, Tare, Net, Battery status
Under/Target/Over
Units of measure (LB, KG)
Peak, Print, OP1, OP2, OP3

Display
Seven-digit, seven-segment, 0.75" high, LCD

Display rate
Selectable (1, 2, 5, 10)

Analog to digital conversion rate
60 times per second

Unit of measure
Three, independently programmable
Pounds, kilograms, custom

Capacity selections
999,999 with decimal located from zero to five places

Incremental selections
Multiples and sub-multiples of 1, 2, 5

Programmable selections
Zero range, motion detection, automatic zero tracking, five-point linearization

Time and date/RAM
Battery backed up real time clock and RAM

Internal resolution
41,248,140 counts per mV/V per second

Standard inputs
Three logic level inputs for: Zero, Print, Tare, Units, F1

Standard outputs
Three cutoff outputs, open collector design
Serial port RS232 or 20mA current loop, or RS422, or RS485

Serial command inputs
Programmable serial response to ASCII character input, SMA protocol

Self diagnostics
Display, keys, inputs, outputs, serial port

Circuitry protection
RFI, EMI, and ESD protection

Options
Trips Interface Unit (TIU3)
90 to 264 VAC, 47-63 Hz

Operating applications
General weighing, automated mixing, simple counting, checkweighing, peak measurement, remote display

Operating temperature
14° to 104°F (-10° to 40°C) NTEP
-4° to 140°F (-20° to 60°C) non-legal
10 to 90% non condensing humidity

Enclosure
Composite IP 54

Weight
8lb, 3.7kg

Agencies
NTEP CC#04-029 - Class III/IIIL: 10,000 divisions
OIML 6,000 divisions pending
Canadian weights and measures pending
CE marked
UL pending
CSA pending
CUL pending

Specifications subject to change without notice.

Call 513-984-2101 or 800-446-1991 for the RACO Discount Price!

Back to Weigh-Tronix main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!