|
|
 |
OPTICON
This product is no longer available through RACO. Please view the Opticon main page for more choices or contact a RACO Sales rep for more information.
------------------------------------------------
Opticon LA-115 Bar Code Wands and Opticon LA-119 Bar Code Wands
Toughest Wand Available
The Opticon MSH-115/119 is built to take a real beating. Experience shows that cables are the most vulnerable part of a bar code wand. Our double-spiraled, "High-Flex" cable greatly reduces failure rates. This durable cable is designed to withstand 2 million 90° bends with a one pound weight.A wand tip must scan millions of labels and withstand accidental drops to the floor. The MSH-115/119’s synthetic ruby ball tip is second only to diamond in hardness and is spring loaded to dampen impact. Self-cleaning, the ruby ball tip assures consistent read performance by protecting the optics from dust and dirt. The extruded, seamless, stainless steel case withstands harder knocks at the workstation than competitive wand cases.
Performs in Extreme Weather
The MSH-115/119 is designed to operate in any environment, from –5 to +120° F. Opticon’s wide temperature range may mean the difference between a working or nonworking bar code wand in extreme weather conditions.Reads Under Intense Sunlight
A special optical bandpass and electrical filter ensures that the MSH-115/119 will read bar codes in direct sunlight or under strong fluorescent lighting.Ideal General Purpose Wand
Features
The MSH-115/119 is designed to read the widest range of bar codes, including both marginal quality dot matrix and high density labels. Opticon wands are available with an assortment of connectors that adapt to your existing hardware.
- Seamless, stainless steel case
Rugged case withstands drops and rough handling- Double spiraled, high-flex cable
Cable lasts longer- Ruby tip
Hard material resists scratches that could affect reading ability- Spring loaded tip
Protects tip if wand is dropped- Self-cleaning ball tip
Protects optics from dust and dirt, ensuring consistent performance.- Wide variety of connector styles and pinouts available
Will plug into your current equipment- High depth-of-field (MSH-115)
Improve reads on laminated bar codes- Reads all symbologies
Will read your barcodes- Superior reading ability
Reads all bar codes even poorly printed dot matrix labels- Wide temperature range
Can be used in harsh environments
Optical |
|
| Illumination Wavelength | Red (l = 660 nm) Infrared (l = 940 nm) |
| Resolution | 4, 6, 7.5, 10 and 15 mils |
| Tilt Angle | 50° |
| Depth of Field | MSH 115 = 0 to 50 mils (1.25 mm) MSH 119 = 0 to 40 mils (1.0 mm) |
| Print Contrast Ratio | 0.3 |
| Scan Velocity (7.5 mil label) | MSH 115 =4 to 40 in/sec. MSH 119 = 2 to 80 in/sec. |
| Ambient Light Rejection | 3 kilolux fluorescent light;30 kilolux incandescent |
Durability |
|
| Shock | No damage after 5 foot drop from any position onto concrete surface. |
| Cable | Withstands over 2 million 90° angle bends at 1 pound tension. |
Electrical |
|
| Supply Voltage | 5VDC (typ.) |
| Current | |
| Operating | 20 mA nominal |
| Standby | 0.3 mA (LED off) |
| Digital Output | Open collector; Black=high logic level |
| ESD | 50 discharges max. /15KV |
| Shield Isolation | 10 MW |
| Grounds | Separate case and signal grounds |
Standard Pin-outs |
|
| Pin # | Function |
| 1 | +5 V |
| 3 | TTL Data |
| 4 | Ground |
| Custom options include separate LED enable input. | |
Physical |
|
| Case Material | Extruded Stainless Steel |
| Dimensions | 5.5 x 0.5" (diam.) |
| Weight | 100 g (3.5 ounces) w/o cable |
| Tip | Synthetic ruby ball |
| Cable Length | 10 ft. nominal |
Accessories |
|
| Part No. | Description |
| 28-WAND1-01 | White desktop stand |
Ordering Info |
|||||
| Model | Resolution | Connector* | Cable | Interface | LED Light Source |
| MSH-115 (Reads Laminates) | 4 mil (0.10mm) | DB9F Squeeze | Coiled | Undecoded | Red |
| MSH-119 (Reads Paper Labels) | 6 mil (0.15mm) | 5-Pin DIN | Infrared | ||
| 7.5 mil (0.18mm) | *Ask our customer
service department for assistance in selecting the connector that best suits your needs. Warranty |
||||
| 10 mil (0.25mm) | |||||
| 15 mil (0.40mm) | |||||
| Part # | Description |
| LA11515I00C-002 | Opticon dumb wand, 6mil general density, infrared 5pin |
| LA11515R00C-002 | MSH115/A01CR dumb wand |
| LA11515R00C-028 | Dumb wand w/DB9F, squeeze, MSH115, 6mil res. |
| LA11518R00C-002 | MSH-115 7.5mil red undecoded coil cord 5pin din connector |
| LA11518R00C-028 | Dumb wand w/DB9F squeeze connector |
| LA11918R00C-028 | Dumb wand, visible light 7.5mil general density, DB9F sq |
| LA11918R00C-093 | Dumb wand, visible light 7.5ml general density, DB9F sq P1 |
| LA11915I00C/002 | Opticon dumb wand, 6mil general density, infared 5pin |
| LA11915I00C-002 | Opticon dumb wand, 6mil 5pin male, pins 1,2,3 +5v, TTLGND |
| LA11915I00C-047 | Opt dumb wand, 6mil caere DB9F-sq 9pin connector infrared |
| LA11915I00C-028 | Dumb wand, 6mil, infrared DB9 female connect |
| LA11915R00C-047 | Dumb wand, 6mil caere DB9F-sq 9pin connector |
| LA11915R00C-028 | Dumb wand, 6mil w/ 9pin squeeze |
| LA11918I00C-028 | Dumb wand, infrared, 7.5mil non-decoded, general, DB9F sq |
| LA11918R00C-047 | Dumb wand, visible light general density |
Specifications subject to change without notice.
Call 513-984-2101 or 1-800-446-1991 for the current RACO Discount Price!
Back to Opticon
RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!
RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!
© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.