This product is no
longer available please contact a RACO Product Specialist for more Sony
products or view the
Sony thermal transfer ribbons main page.

--------------------------------------------------
Sony TRX-75 specialty resin thermal transfer ribbons
Sony’s TRX-75
ribbon is an excellent all around resin based product. Its resin formulation
provides resistance to a number of harsh environments. Sony TRX-75
ribbon demonstrates excellent smear resistance at high temperatures as well as
superior chemical resistance. Sony TRX-75 ribbon will also withstand extreme
applications such as electronics, automotive and medical. This ribbon
offers the ability to print at higher speeds and higher resolution than
most thermal transfer ribbons while consistently providing high print
quality.
-
Cross-linked resin ink
formulation
-
Provides exceptional
chemical and solvent resistance
-
Superior resistance to:
alcohol, petrol & kerosene
brake fluid, engine oil & car wax
halide solvents
-
High heat resistance
-
Excellent smear resistance
at temperatures as high as 100°C (212°F)
-
Excellent printability
Higher print speeds and higher resolutions (200-600dpi)
-
UL recognized
Sony
TRX-75 Specialty Resin Ribbons Specific Features
-
Excellent printability
-
Higher print speeds and
higher resolutions (200-600 dpi)
-
Excellent smudge and scratch
resistance
-
Excellent solvent resistance
Sony TRX-75 Specialty Resin Ribbons Recommended applications
Automotive underhood labels, chemical drum labels, electronic
labeling, pharmaceutical labels, shelf labels.
|
Ribbon property |
|
|
| Description |
Specification |
Measurement method |
| Ink material |
Resin |
- |
| Total thickness (μm) |
6.8 +
0.5 |
Micrometer |
| Base film thickness (μm) |
4.5 +
0.5 |
Micrometer |
| Ink thickness (μm) |
1.5 +
0.4 |
Micrometer |
| Print density |
>
1.70 |
Densitometer |
Durability of printed images
Label stock
Topcoated white polyester
Print speed
6ips
Print density
1.75
Smudge resistance
ANSI A*
Scratch resistance
ANSI A*
*Represents the American
National Standard Institute (ANSI) Grade measured at the given
conditions. Grade levels are A, B, C, D, and F, where A is excellent, B
is above average, C is average, D is below average, and F is poor.
Test equipment
Colorfastness Tester
Conditions
Smudge test
100 cycles @ 500 grams with cotton cloth
Scratch test
50 cycles @ 200 grams with stainless steel pointed tip
Resistant to rubbing
with: Isopropyl alcohol, Formula 409®, Mineral spirits, gasoline, brake
fluid
Conversion chart
Millimeters (mm) to inches > mm ÷ 25.4
Inches to mm > Inches ÷ 0.03937
Meters (m) to Feet (ft) > m ÷ 0.3048
Feet to Meters > Feet ÷ 3.2808
C° to F° > (1.8 x C°) + 32 = F°
F° to C° > (F° ÷ 1.8) -17.77 = C°
Thousand square inches (MSI) to m2 > msi x 0.645
MSI = m2 ÷ 0.645
Call 513-984-2101
or 800-446-1991 for the RACO Discount Price!
Call
for more ribbon choices or ribbons by
other manufacturers not listed.
Specifications subject to
change without notice.