Paxar Pathfinder® Ultra® Silver
6032™ Printer
The Pathfinder Ultra Silver
handheld printer combines outstanding small label printing value with
unique productivity enhancing print and apply capabilities.
General
Specifications
Dimensions
Height
6.5" (165mm)
Width
7.75" (197mm)
Depth
3.25" (83mm)
Weight
1.973lbs (0.90kg)
Ship Weight
4.09lbs (1/86kg)
Printhead
2" (50.8mm)
203dpi (8 dots per mm)
Operator Interface
On/Off Switch, Trigger, Laser scan LED, beeper and a 23 key keypad
Display
Graphical LCD with two 15-character lines and a status line
Serial Port
3.5mm stereo jack
Print Ratio
30% black max. per square inch
Memory
512K RAM and 2MB Flash
Standard Fonts
Standard, Reduced, Bold, OCRA-like, EFF Swiss Bold*, HR1, and HR2
(HR1 and HR2 are only for numeric data)
* Also available as a scalable font. The printer supports Bitmapped,
TrueType™, and International fonts.
Font Magnification
1x to 7x for bitmapped fonts
4 to 250 pt for scalable/TrueType and scalable fonts.
Supplies
Only Paxar supplies are
recommended. For high density and serial bar codes, Paxar "premium"
supplies are recommended. The printer supports die cut, black mark, and
non-indexed supplies.
Supply
Sizes
Widths
1.2" (30mm) to 2" (51mm) in continuous mode
Tag/Receipt Paper Width
1.2" (30mm) to 2" (51mm)
Length (for all supplies)
0.785" (20mm) to 4" (102mm)
Maximum Print Area
1.89" (48mm) x 3.837" (97mm)
Roll Size
420" (10.7m) to 580" (14.7m)
Performance
Printing Rate
Up to 2" (51mm) per second
Battery Type
7.4V Lithium Ion
Inches Per Charge
Up to 5000 inches, 30% black printing on the supply. However, other
factors such as duty cycle and scanner use can reduce inches printed per
charge.
Battery Cycle Life
Approximately 300+ full discharge cycles. Cycle life is approximate.
Many factor effect an individual battery's performance.
Warranty
One year parts and labor (ship-in). Batteries and cables are covered
by a prorated limited warranty of three (3) months from the date of
shipment. Physical damage to the battery(ies) or cable(s) is (are) not
covered by the limited warranty.
Recommended Duty Cycle
3000" per day at 25% print coverage (either one label at a time or
in batches). The maximum duty cycle is 33% (5 out of 15 minutes in any
given time period.)
Environment Ranges
Operating Temperature
40° to 104°F (4° to 40°C)
Storage Temperature
15° to 120°F (-9.4° to 48.9°C)
Humidity/Operating and
Storage
5% to 90% non condensing
Electrostatic Discharge
and Air Quality
Some problems with electronic equipment may occur in environments
prone to static discharge or extreme dust conditions. Paxar suggests
that you take precautions to minimize these problems.

Specifications subject to
change without notice.