|
|
 |
Psion 9160 Wireless Gateway
Next generation freedom- power, speed, and flexibility
- The 9160 supports dual radio architecture allowing support for a mix and match of 802.11 RF technologies - 802.11a/b/g in one access point
- Conforms to the 802.3af standard, the 9160 is Power Over Ethernet capable, allowing for cost effective installations, its dual radio support allows for broader wireless coverage
- Onboard industrial AC power supply provides reliable power for non-PoE installations
- Enhanced real-time diagnostics and configuration via HTTP, Telnet or serial console
- The 9160 Wireless Gateway is fully compatible with MapRF 2, Psion Teklogix network management software for wireless systems
When you need to instantly move information over a broad area, you need the right radio backbone for your site and applications. The 9160 Wireless Gateway allows you to mix and match RF technologies; 802.11b is suitable for data collection applications or you can choose 802.11a/g for higher throughput applications. If cost is a factor in your wireless backbone decision, then the 9160 is the Wireless Gateway for you. Supporting Power over Ethernet, the 9160 eliminates the cost of purchasing and installing traditional A.C. power lines. With support for dual 802.11 radios, the 9160 allows for broader wireless network coverage
Psion 9160 Wireless Gateway Specifications
Processor and Memory
Microprocessor
Intel IXP420 processor at 266MHzMemory
8MB Flash
32MB SDRAMWireless Communications
Standard Slot 1 Radio
802.11b/g Mini-PCIOptional Slot 2 Radio
802.11a/b/g Mini-PCIAntenna Options
- The 9160 supports a wide variety of indoor and outdoor 2.4 and 5GHz omni-directional and sector panel antenna for coverage applications
- The 9160 also supports antenna for bridging (WDS) applications
- Antenna diversity is supported for slot 1 and slot 2 radios.
Security
- 802.1x compliant
- MAC filtering
- WPA I (TKIP encryption)
- WPA 2 (802.11i, AES encryption)
- Inhibit/Ignore SSID broadcast
- User-based access control via embedded Radius authentication server (PEAP with 8 APs or less)
Network Interface
- 10/100 Base-T with auto-negotiation, half and full duplex
Diagnostic/Configuration Terminal Interface
- RS232 port for debug and diagnostics supporting configuration and firmware update
- SNMP support (compatible with MapRF)
- Telnet to console
- HTTP web browser management interface
Advanced Features
- Wireless Distribution System (WDS)
- Load balancing
- Multiple SSIDs/BSSIDs, Virtual Wireless Networks (VWNs)
Size and Weight
Dimensions
36.3cm W x 26.2cm H x 7.4cm D (14.3" W x 10.3" H x 2.9" D)Weight
2.9kg (6.5lbs)Environmental
Storage Temperature
32°F to 158°F (0°C to +70°C)Operating Temperature
32°F to 151°F (0°C to +55°C)Operating Relative Humidity
10% to 90%Dust and Moisture
IP42Vibration
EH0002 (shipping vibration only)Reliability
MTBF 25,000 hours (MIL-HDBK-217F)Visual Indicators
LED 1
On solid when Ethernet link presentLED 2
Blinks for rx/tx Ethernet trafficLED 3
Blinks for rx/tx radio 1 trafficLED 4
Blinks for rx/tx radio 2 trafficLED 5
Always off (unused at this time)LED 6
On solid when power presentPower
Input Voltage
100-240VAC, 50/60 Hz, 1APower Over Ethernet (POE)
802.3af compliant, 48VDC nominalApprovals
USA
FCC part 15, subpart B, class B (unintentional radiated emission) UL601950, 2000 Bi-Nat (electrical safety)
*Note: NRTL/C done by CSA covers UL 1950 bi-national standardsCanada
ICES-003 / CSA C108.8-M1983 (unintentional radiated emission)
CSA 950 CSA-C22.2 No. 950-M98 (electrical safety)
*Note: FCC part 15, subpart B covers ICES-003 / CSA C108.8-M1983European CE Mark
73/23/EEC Low Voltage Directive
TUV & CB EN 60950:1992+A1+A2+A3+A4+A11 (electrical safety)89/336/EEC
EMC Directive:EN 50081-2
1998 Generic Emission Standard- Industrial EnvironmentEN 55022 based on CISPR 22, class B (information technology equipment)
EN50082-1
1997 generic Immunity Standard - Industrial EnvironmentEN 61000-4-2 ESD
EN 61000-4-3 radiated RF immunity
EN 61000-4-4 electrical fast transients
EN 61000-4-5 surge withstandIndustrial Applications
Indoor
Suitable for rugged warehouse and manufacturing applications with any type of coverage patternRefrigerated
Dual radio operation and antenna splitting allows for coverage of isolated refrigerated sections from a single access pointOutdoor
A variety of high gain antenna and wired or wireless (WDS) backhaul options make the 9160 a suitable choice for outdoor port and yard applicationsMultiple SSIDs
Divide the WLAN into virtual wireless LANs with VLAN support for different applications or user typesPsion 9160 Gateway LIST Pricing:
Part # Description List Price
Call for Discounts!Single radio access point, RA2060 (802.11b/g), PoE, no antenna $990 Power Supply Internal AC power supply $110 Radios RA2050 Slot 2, 802.11a/b/g radio (configured either 802.11a or 802.11b/g) $250 802.11a/b/g - lightning protector + 36" RTSMAm-Nm cable (per antenna) $100 Diversity Internal cable for diversity antenna (per radio).
Note: a 2nd set of antenna and cable is added, additional charges applies.$65 Antenna - 2.4 - 2.5GHz (802.11b/g) 9001953 Antenna, 2.4/5.1- 5.8, indoor, 2/4dBi screw-on articulate, RTSMA male $45 93977 Antenna, 2.4, indoor/outdoor, 5dBi omni fiberglass, N female $185 94070 Antenna, 2.4, indoor/outdoor, 7dBi omni colinear, N female $145 9001677 Antenna, 2.4, outdoor, 8dBi omni 12deg down tilt, N female $310 21266 Antenna, 2.4, outdoor, 12dBi omni fiberglass, N female $630 9002812 Antenna, 2.4, indoor, 6dBi patch, N female $165 9001951 Antenna, 2.4, indoor/outdoor, 8.5dBi patch, N female (optional: pan/til mount 9002004) $230 9000047 Antenna, 2.4, indoor/outdoor, 10dBi yagi, N female $405 9001676 Antenna, 2.4, outdoor, 12dBi sector panel, N female $1,420 96232 Antenna, 2.4, indoor, FCC only, 14dBi 4-element panel, N female $330 21268 Antenna, 2.4, indoor/outdoor, FCC only, 14dBi yagi, N female $380 Antenna- 5.1 - 5.8GHz (802.11a) 9001953 Antenna, 2.4/5.1-5.8, indoor, 2/4dBi screw-on articulate, RTSMA male $45 9002008 Antenna, 5.1-5.3, indoor/outdoor, 6dBi omni, N female (requires bracket 9002003) $260 9002009 Antenna, 5.1-5.3, indoor/outdoor, 10dBi omni, N female (requires bracket 9002003) $295 9001950 Antenna, 5.4-5.8, outdoor, 12dBi omni, N female $440 9001952 Antenna, 5.1-5.3, indoor/outdoor, 10dBi sector 60deg. N female $335 9002007 Antenna, 5.1-5.8, outdoor, 18dBi panel, N female $745 9002006 Antenna, 5.2-5.8, outdoor, 28dBi dish, N female $1,325 Antenna - Explosion Proof 1002093 Antenna kit, explosion proof, 2.4GHz 2dBi stubby, N female, NON-RoHS $550 1002093-001 Antenna kit, explosion proof, 2.4GHz 2dBi articulated, N female, NON-RoHS $575 9008695 Antenna mount, explosion proof, RPSMA jack-RTSMA plug (antenna not included) $715 Antenna Cables (N) 1000641-300 Cable 3' LMR200, N male-N male, 0.4dB @ 500MHz, 0.7dB @ 2.5GHz $55 20169-300 Cable 12.5' LMR400, N male-N male, 0.5dB @ 500MHz, 1.0dB @ 2.5GHz, 1.4dB @ 5.8GHz $105 20170-300 Cable 25' LMR400, N male-N male, 1.0dB @ 500MHz, 1.9dB @ 2.5GHz, 2.9dB @ 5.8GHz $130 20171-300 Cable 50' LMR400, N male-N male, 1.7dB @ 500MHz, 3.6dB @ 2.5GHz, 5.6dB @ 5.8GHz $185 21209-300 Cable 50' LMR600DB, waterproof, N male-N male, 2.4dB @ 2.4GHz, 3.9dB @ 5.8GHz $295 21210-300 Cable 50' LMR900DB, waterproof, N male-N male, 1.6dB @ 2.4GHz, 2.7dB @ 5.8GHz $685 21211-300 Cable 100' LMR900DB, waterproof, N male-N male, 3.0dB @ 2.4GHz, 5.1dB @ 5.8GHz $1,090 Antenna Adapter Cables (RTSMA-N) 19648-001 Cable, ANT Adapter RTSMAm-Nf 18" LMR240 1" MIN Bend Radius $45 30445-001 Cable ANT adapter RTSMAm-Nm 18" LMR240 1" MIN Bend Radius $50 30445-002 Cable ANT adapter RTSMAm-Nm 36" LMR240 1" MIN Bend Radius $50 Antenna Other (installation accessories 97918 Adapter, bulkhead, N female-N female (feed through NEMA box or grounding plate) $40 9008685 Tape, weatherproofing, 2" W x 60" L, covers 4x N type connections $20 Antenna Misc. - Adapter, Lightning Protector, Diversity Upgrade, Mounting Bracket, Power Divider 93584 Adapter, N male-N male $30 9009795 Adapter, N female-SMA male (connects N male cable to antenna with SMA female) $35 9009796 Adapter, RPSMA plug-N female (use with explosion proof mount) $42 94339 Adapter, N female-N female (for joining two N male-N male cables) $35 97918 Adapter, bulkhead, N female-N female (feed through NEMA box or grounding plate) $40 21653-001 Diversity upgrade kit for RA2020, RA2050 & RA2060 (1 kit per radio) $65 9001954 Lightning protector, 2-6GHz, N female-N female, DC block $180 9002004 Mounting bracket pan/tilt for 9001951 2.4GHz patch $50 9002003 Mounting bracket for 9002008 & 9002009 5.xGHz omni $35 9009800 Power divider, 2 way, 2-6GHz, N female $735 Power Injectors 9008263 Injector, power over Ethernet, 1 port $59 9008264 Injector, power over Ethernet, 6 port $399 9008265 Injector, power over Ethernet, 12 port $599 9008266 Injector, power over Ethernet, 6 port with SNMP mgmt $898 9008267 Injector, power over Ethernet, 12 port with SNMP mgmt $1,139 Other Accessories 1916641 Kit, universal Quickmount w/Gnd $100
Call 800-446-1991 or 513-984-2101 for the RACO Discount Price!
Specifications and pricing subject to change without notice.
Back to Psion Integrated UHF RFID Reader
Back to Psion Data Collection main
RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!
RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!
© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.
© Psion products are copyrights/trademarks of Psion Teklogix, Inc.