
PSION HC Range Bar Code
and Communication
(Expansion Modules)
This product
has been discontinued. Please check the PSION
main page for other PSION products.
HC Bar Code Interface
This interface plugs into either of the 2 expansion ports of the HC and
includes a single 9-pin connector for a Bar Code Wand, CCD Scanner, or Laser Scanner. The
control and discrimination software enables end users to write their own bar code
applications in either OPLIG or "C". This interface also has a RS232 9 pin
connector for PC communications.
HC RS-232/LIF Interface
This interface plugs into the bottom expansion port of the HC. With this
interface you can you can communicate with your PC either with the RS232 port or insert
the HC in a Docking Station for PC communication and battery charging.
HC TTL/LIF Interface
This interface plugs into the bottom expansion port of the HC. This
interface in compatible with TTL output Scanners or any other device that takes TTL
output. This interface can also be use in the HC Docking Station for PC communication and
battery charging.
HC Bar code/LIF Interface
This interface plugs into the bottom expansion port of the HC. This
interface has a 9-pin connector for any wand emulation barcode reading device such as
Wands, CCD Scanners, and Laser Scanners. This interface can also be used with the HC
Docking Station for PC communication and battery charging.
HC RS-232 Parallel Interface
This interface plugs into either of the 2 expansion ports of the HC or
the cradle. It provides for the connection to printers, external modems and desktop
computers. It includes a 9-pin Mini DIN RS232 serial connector and a 25-pin, female
parallel Centronics Connector.
Dual Serial Port Interface
This interface provides 2 industry standard 9 pin RS-232 Serial
Interfaces. A DB9M connector is provided for RS-232 use and a DB9F is provided for
RS-232-TTL use.