Printek FormsPro 4503 Detailed Specifications:
Print Modes:
Fast Draft: 530 cps
Draft: 400 cps
Fast Draft/High Impact: 265 cps
High Impact: 200 cps
Letter Quality: 100 cps
Optical Quality: 65 cps
Graphics: 15, 360 dps
Printhead: 18 -wire parallel
Paper Slew Rate: 12 ips
Multi-Part Forms:
1 to 9 parts
0.025" max. thickness
Audible Noise (Draft Mode):
62 dBA
Setup (Automatic Methods):
Printer-to-printer
Setup unit
Operator Indicators:
LEDs for power, Online and Fault
1x16 LCD for form selection
On/off line status and error descriptions
I/O Buffer: 4K, expandable to 28K
Standard Interfaces:
Parallel: Centronics compatible
Serial: RS232, 300-19,200 baud
Physical Specifications:
(H x W x D): 9.5" x 25" x 20.3" (24cm x 63.5cs x 51.5cm)
Weight: 53 lbs. (24kg)
Printek FormsPro 4503 Common Printer Specifications:
Character Matrix:
Fast Draft: 9 x 9 cell
Draft: 12 x 9 cell
Letter Quality: 24 x 18 cell
Optical Quality: 36 x 18 cell
Operator Controls: Normal Operating Mode: Online, Form Feed/Load,
Forms Select/Unload, and Vertical Print Adjust
Software Controls: Emulation choice of Printek, Epson, FX, IBM Proprinter, DEC LA 120 or Basic Bar Codes (Includes Code 39, 2 of 5,
Interleaved 2 of 5)
Character Sets: Fast Draft, Draft, and Letter quality for Epson
and IBM Proprinter. Optical Quality for OCR-A and OCR-B
Character Spacing: 5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15,
16.7, 17.1 and 20 cpi
Line Length: 13.6 inches (34.5 cm)
Line Spacing: 6 and 8 lpi, Also software programmable
Form Parameters: Non-volatile memory for ten forms, each
supporting settings for: tractor path, cpi, lpi, form length, left
and right margins, top and bottom margins, unidirectional printing,
slashed or non-slashed zero, language, font, high-impact on/off
Ribbon: Cartridge-nylon fabric, mobius loop, 23 million
characters
Paper Width: 2.5 to 15 inches (6.4 to 38.1 cm)
Paper Loading: Straight path, bottom loading
Paper Handling:
Tear Bar: Auto-scroll allows zero tear-off distance
Auto-Gap:
- Adjusts printhead to form thickness
- Paper Type: fanfold, continuous forms, edge punched, 15 lb.
min. weight for single-part paper
Sensing: Paper motion, paper edge and paper out
Power Requirements:
Voltage: 120 VAC +/- 10%
Frequency: 60 Hz
Power Consumption: 60W non-printing, 225W printing (optional 240
VAC, 50 Hz power supply also available)
Graphics Density*: 60 to 240 dpi horizontally x 72 dpi vertically
Reliability:
MTBF: 10,000 hours on electronics with no duty cycle limitations
Printhead Life: 500 million draft equivalent characters
Machine Life: 1 million pages
One-year printer warranty, two-year limited printhead warranty
when Printek brand ribbons are used; one-year warranty when
non-Printek brand ribbons are used
*May be emulation dependent.
Printek FormsPro 4503 Options and Accessories:
|
