Paragon PLS-400 PAC (Print and Apply Control), packaging applications requiring more logic control and systems integration and within an open architecture environment

PARAGON

Paragon PLS-400 PAC (Print and Apply Control)

Advanced print-and-apply labeling system for integration and control.
The new Paragon PLS-400pac print-and-apply system offers all the benefits of the original Paragon PLS-300pas system, plus it has robust features that make it ideal for packaging applications requiring more logic control and systems integration within an open architecture environment.

The Paragon PLS-400pac is a flexible, cost-effective approach to labeling your products, cartons, cases and pallets. It can be configured with various print engines and applicator modules- standard tamp, dual tamp, wipe-on, roll-on, vacuum blow, and corner wrap - to fit your needs, whatever your application.

The Paragon PLS 400pac not only gives you the features you need today, but the control and integration that you’ll need into the future!

A remote, machine-mountable PLC display enables you to easily make changes to system programs and application logic sequences. To secure your settings, the display can be detached once the application is programmed.

Other Paragon PLS-400pac features include a Label Format Save option that stores all the parameters of a given label to reduce setup time and ensure repeatability for future runs. A status Light Pole alerts operators when label and ribbon media levels are low or when a system error could affect label application. A Vacuum Disable setting lets the operator disable the vacuum component if there's no label data in the queue, minimizing the use of compressed air and extending the life of the system's air components. A Reprint Last Label switch, which lets an operator print "one off" the last label, greatly reduces the time normally required to generate a second label.

Paragon PLS-410
The Paragon PLS-410 is a robust apply-only label applicator, providing all the powerful Paragon PLS-400 chassis features for applications using pre-printed labels. Should your needs change in the future, simply remove the patented Express module and replace it with the OEM print engine of choice to upgrade to a Paragon PLS-420 printer applicator, or install the RFID module of choice and upgrade to a Paragon PLS-430 or Paragon PLS-440.

Paragon PLS-420
The Paragon PLS-420 is a durable print-and-apply labeler that produces labels on demand and applies them in a single, easy operation. Expanding on “nextoff” technology, the Paragon PLS-420 uses every label and eliminates waste. It accommodates most any label size and prints sequential numbers, time/date stamps, lot codes, expiration dates, bar codes, human readable text, graphics, and more.

Paragon PLS-430 (RFID)
The Paragon PLS-430 is an Encode & Apply™ system that integrates RFID technology with all the benefits of the Paragon PLS-400 chassis system. The Paragon PLS-430 includes a fully integrated reader with antenna for verifying, encoding, re-verifying and then applying labels to pallets and cases. Any tag that is not verified remains on the waste liner, and the next tag moves into position for verification. The Paragon PLS-430 lets you encode and apply RFID labels now, and provides a clear migration path to Print, Encode & Apply should your application change.

Paragon PLS-440
The Paragon PLS-440 enables you to program RFID tags and print variable data to smart labels on-demand. Like the Paragon PLS-430, the Paragon PLS-440 verifies the tag prior to application. The system rejects any label with a bad tag, and forces the label to remain on the waste liner. The label is then reproduced with a good tag.

Paragon PLS-400 Series Features

Features:
- PLC controls
- Remote mount interface and display
- Built in counters
- Built in diagnostics mode
- Built in label set up recipes
- External I/O interface connection
- Standard product detect
- Robust plate aluminum design
- Stainless steel fasteners
- Low supply warning
- Easy 7-module design
- Migration path to RFID

Optional Features:
- Bolt on 16" powered unwind mechanism
- Alert light (3-stack)
- T-base stand: Many styles available
- Dual product sensing
- Applicator home detect
- Cycle complete output
- Label on pad sensor

Paragon PLS-400pac Specifications

Print method
Direct thermal and thermal transfer

Media supply
12" (305mm) maximum outside diameter on 3" (76mm) standard core

Media rewind
Roll to roll with full carrier rewind capacity

Low media supply sensing
Standard detection and signal output when label and ribbon supplies are low or print interruption occurs; status light pole signals low supply warning

Print engines
Sato America, Inc., Zebra Technologies, Inc., and Datamax Corporation

Product detect sensor
Standard photo-electric product sensor; operator adjustable delay between product detect and label application

Product labeling accuracy
Up to 1/32" with consistent labels and controlled carton handling

Air requirements
60-80 PSI, 2cfm, clean, dry, non-oiled

Power source
115, 230 VAC, 50/60Hz

Operating temperature
40°F to 100°F (4°C to 38°C)

Humidity
10% to 95% non condensing

Machine construction
Plate aluminum chassis

Dimensions
26" L x 24" H x 15" D
(660mm L x 610mm H x 381mm D)
or
26" L x 24" H x 17" D (660mm L x 610mm H x 432mm D) dependent on print engine

Weight
80lbs (35.7kg) to 87lbs (38.8kg) depending on print engine

Options
Bolt on 16" powered unwind mechanism
T-Base stand: vertical, all-thread hand crank, maximum 78" (198cm) height adjustment
Recall stored label formats
Product detect, applicator home sensor, label on pad sensor

Paragon Standard tamp

Label width
1" min (25mm) to 6" max (1152mm)

Label length
.5" min (13mm) to 6" max (162mm)

Accuracy**
Up to +/- .031" (.79mm)

Speed*
Up to 70ppm dependent on print engine, label, size and stroke length

Typical applications
Cases, cartons and packaged goods

Labeling configurations
Top, bottom and side panels

Paragon Dual tamp

Label width
2" min (51mm) to 7" max (178mm)

Label length
2" min (51mm) to 6" max (162mm)

Accuracy**
Up to +/- .031" (.79mm)

Speed*
Up to 20ppm dependent on print engine, label, size and length of applicator swing arm

Typical applications
Pallets, cases and cartons

Labeling configurations
Custom-selectable as a leading and adjacent panel application; or, a following and adjacent panel

Paragon Roll-on

Label width
1" min (25mm) to 7" max (178mm)

Label length
4" min (102mm) to 14" max (356mm)

Accuracy**
Up to +/- .031" (.79mm)

Speed*
Up to 60ppm dependent on print engine, label, size and length of applicator swing arm

Typical applications
Cases, cartons and packaged goods - well suited for long skinny labels

Labeling configurations
Top, bottom or side panels

Paragon Corner wrap

Label width
3" min (76mm) to 7" max (178mm)

Label length
8" min (204mm) to 14" max (356mm)

Accuracy**
Up to +/- .031" (.79mm)

Speed*
Up to 15ppm dependent on print engine and label size

Typical applications
Cases and cartons

Labeling configurations
Leading and adjacent panels

Paragon Vacuum blow

Label width
1" min (25mm) to 4" max (102mm)

Label length
.75" min (19mm) to 1" max (25mm)

Accuracy**
Up to +/- .031" (.79mm)

Speed*
Up to 75ppm dependent on print engine and label size

Typical applications
Irregular and/or fragile products - packaged goods, cases and cartons

Labeling configurations
Top, bottom or side panels

*Dependent upon print engine (Sato, Zebra and Datamax)
**Dependent upon product handling

Call 800-446-1991 for the RACO Discount Price!

Specifications subject to change without notice.

Back to Paragon main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!