Opticon
CR2/LG2 (2D) barcode reader
The Opticon CR2 and Opticon LG2 is an
innovative imager that uses advanced Bluetooth™ wireless and superior CMOS bar code technology combined in a futuristic package. The
versatility and flexibility of the Opticon CR2 and Opticon LG2 architecture gives
you the highest performance and protects your investment against future
application demands.
Bluetooth™ wireless technology gives you
a cable-free imager for mobile applications. The imager can be
configured to retain data in nonvolatile memory or transfer in real
time. The Bluetooth™ protocol gives reliable data transfer at extremely
low power consumption
at ranges up to 300 feet.
Special Bluetooth™ routing software
enhances bi-directional wireless transmissions. CodeXML Router – BE™
software monitors wireless communication to ensure that data is not
lost, even if the CR2/LG2 is taken out of range.
The Quick Connect Code™ technology links
the CR2/LG2 with other Bluetooth enabled devices easily by scanning a
barcode with unique Bluetooth™ address.
The technology employed to achieve this
high performance is superior to most bar code imagers. Dual optical
paths optimize reading at both near and far distances. 400 MHz, 32-Bit
micro-processor operation means super fast decoding and a 1.3 million
pixel CMOS sensor assures quality high density images. 8 MB of
non-volatile on-board memory allows the Opticon CR2 and Opticon LG2 to store enormous
quantities of data.
Opticon CR2 and Opticon LG2 Features and
Benefits

- 1.3 mega pixel CMOS imager
Enhanced reading of linear and 2D barcodes
- Bluetooth™ Communications
Wireless communication up to 3000 ft
- DOT technology
Allows adaptation to barcodes commonly read
- Quick Connect Code
Links LG2 to Bluetooth™ enabled devices 
-
8 MB memory
Holds data in memory if out of comm. range
-
Removable handle
Optional handle for better ergonomics
-
Wireless capable
For wireless communications, a Bluetooth radio is available and
compatible with a wide range of systems, or can be used in conjunction
with a specially designed modem that provides data and pairing
encryption for unsurpassed wireless data security.
-
Application specific
accessories
The Opticon CR2 can be accompanied by a variety of accessories,
making it is the only product available in: batch, cabled or wireless
formats; handheld, ruggedized cabled, or battery handle use-case
scenarios; and, lanyard hook attachment or presentation stand
form-factors.
-
Real-time performance
feedback
The Opticon CR2's user feedback systems include a choice of a beep,
vibration and/or status LEDs along with a laser targeting technique for
audible, tactile and visual performance feedback.
Opticon LG2
Specifications
Dimensions
Reader
1.3" H x 4.3" D x 1.8" W
(3.3cm H x 10.9cm L x 4.6cm W)
Handle
3.8" H x 1.4" D x 1.2" W
(9.65cm H x 3.6cm D x 3cm W)
Weight
Reader
2.5oz (71.5gm) - does not include cable
Battery
2.1oz (59.5gm) - does not include cable
Battery blank
.5oz (13.6gm) - does not include cable
Handle
2.1oz (58.9gmQ) - does not include cable
Cable length
6t/1.8m
User
environment
Operating temperature
0° to 40°C / 32° to 104°F
Storage temperature
-20° to 60°C / -4° to 140°F
Humidity
5% to 95% non condensing
Decode capability
MaxiCode, PDF417, Data matrix, QR Code, Aztec Code, Code 39, Code
128, UPC/EAN/JAN, Int 2 of 5, Codabar, Code 93, UCC RSS, POSTNET,
PLANET, Japanese Post, Australia Post, Royal Mail RM4SCC, KIX code
Image
output options
Formats
JPEG, BMP, TIFF
Field selection
Near or far
Resolution selection
1024x640, 640x480, 354x288
Gray scale
256 level
Time stamp
Interval logging
Performance
Field of
view
Near
21.5° horizontal by 16.2° vertical
Far
22.9° horizontal by 11.6° vertical
Focal
point
Near
21.5° horizontal by 16.2° vertical
Far
22.9° horizontal by 11.6° vertical
Sensor
Progressive Scan CMOS 1.33MP (1024x1280) 256 level gray scale
Optical
resolution
Near field
1024 x 640
Far field
1024 x 640
Pitch
+60° (from front to back)
Skew
+60° from plane parallel to symbol (side-to-side)
Rotational tolerance
+180°
Print contrast resolution
25% (1D symbologies) or 35% (PDF417) absolute dark/light reflectance
differential, measured at 650nm
Target beam
Class 2 visible laser diode at 630nm
Ambient light immunity
Sunlight: up to 9,000ft-candles/96,890 lux
Shock
Withstands multiple drops of 6.56ft (2m) concrete
Power requirements
Reader @ 5vdc (mA) - typical = 110
Peak = 500
Standby = 28 Bluetooth radio (mA) - typical = 120
Peak = 600
Standby = 28
Battery with radio will support 4000 read/transmits per charge including
8 hours of standby interval
Interfaces
USB (standard) or RS232, Bluetooth Class 1 Radio (300ft)
Opticon CR2
Specifications
Electrical
Voltage Requirement
5V
Reader Current
140mA Typical; 310 mA MAX
Bluetooth Current
280mA Typical; 96mA Idle; 350mA MAX
Power Consumption
1950 mAH battery in reader with radio will support 11,000+
reads/transmits per charge
Optical
Photo Sensor
Progressive Scan CMOS 1.33 MP
Optical Resolution
1024x1280 (1024x640 Near/Far Field)
8bit (256-level) grayscale
JPEG, Raw (uncompressed) output
Reading Pitch Angle
+60° (from front to back)
Reading Skew Angle
+60° from plane parallel to symbol (side-to-side)
Reading Rotation Angle
+180°
Field of View
21.5° horizontal by 16.2 vertical (Near)
22.9° horizontal by 11.6 vertical (Far)
Focal Plane
Approx 4" (Near)
Approx 9" (Far)
Target Beam
Class 2M Visible Laser Diode at 630nm
Print Contrast Res.
25% (1D symbologies) or 35% (PDF417) absolute dark/light reflectance
differential, measured at 650nm
Identification
Symbologies
MaxiCode, PDF417 (including Macro support), Data Matrix, QR and
Micro QR Code, MicroPDF417, GoCode*, Composite, Code 11, Aztec, Code 39,
Code 128, Pharmacode, Codabar, Int 2 of 5, UPC/EAN/JAN, Codablock F,
Code 93, RSS, Postnet, Planet, Japanese Post, Australian Post, Royal
Mail, KIX, MSI Plessey, Trioptic, NEC 2 of 5, Matrix 2 of 5, OCR (A &
B*), Telepen, and Hong Kong (2 of 5)
Code Quality
Code Readability Index
Data Editing
JavaScript Capable*
* Requires additional
licensing
Communication
Interface
USB (HID), RS232 & PS/2
Operational Modes
Wireless, cabled or batch modes
Environmental
Operating Temperature
0°C to 50°C (32°F to 122°F)
Storage Temperature
-20°C to 65°C (-4°F to 150°F)
Operating Humidity
5% to 95% non condensing
Ambient Light Immunity
Sunlight: up to 9000ft-candles/96,890 lux
Shock
Withstands multiple drops of 6ft (1.8m) to concrete
Physical
Dimensions
33mm H x 109mm D x 46mm W (1.3" H x 4.3" D x 1.8" W)
Reader Weight
2.5oz (71.5g)
Battery Weight
2.1oz (59.5g)
Battery Blank Weight
0.5oz (13.6g)
Memory Capacity
3.8MB non-volatile memory
Time Stamp
Interval logging
Typical performance based
on good quality symbols in normal room temperature and light conditions.
Accessories (Sold
Separately)
External two-bay battery charger
CodeXML Bluetooth modem
Ruggedized cabled or battery handle
Reader stand
USB, PS/2 & RS232 cables
1950 mAH Li-ion batteries
US/Europe/SA/UK/Asia power supply
Battery handle charger
Elastomer protective boot
Opticon CR and Opticon LG2-2D barcode reader
| Part # |
Description |
List
price
Call for Discounts! |
| |
Opticon LG2 reader |
|
| 32-LG2CCHG01-01 |
2-bay battery charger,
AC P/S |
$129 |
| 41-LG2R1C-K01 |
8ft coiled cable, RS232,
W/PS |
$49 |
| 41-LG2U1S-01 |
6ft straight cable, USB
int |
$39 |
| 42-LG2ROUTCE-01 |
Code router, Bluetooth
edition (pocket PC) |
$149 |
| 42-LG2ROUTWS-01 |
Code router, Bluetooth
edition (Windows) |
$129 |
| 67-LG2BATT001-01 |
Blank battery module |
$19 |
| 67-LG2HNDL01-01 |
LG2 gun format handle |
$59 |
| LG2CRXXX-001 |
LG 2 core unit, 2D B/C
imager |
$789 |
| |
Opticon CR2 Reader |
|
|
CC-CR2012-R1-01 |
CR2 batch
kit w RS232 gun style blank batt power sup |
$868 |
|
CC-CR2012-U1-01 |
CR2 batch
kit w USB gun style blank batt |
$858 |
|
CC-CR2012-UB-01 |
CR2
wireless kit w USB Bluetooth lion bat handle |
$1,168 |
|
CC-CR2012-W1-01 |
CR2 batch
kit w PS2 gun style blank batt |
$868 |
|
CC-CR2AGH1-01 |
H1
no-battery handle for gun style |
$59 |
|
CC-CR2AGH2-01 |
H2
ruggedized no battery handle |
$85 |
|
CC-CR2AGS1-01 |
CR2 metal
hands free stand |
$99 |
Specifications subject to
change without notice.