NCI 7820b scale, NCI 7820B Portable Bench Scale with stainless steel platter, 6 digit backlit display, RJ45 connector, zero weight, hold, ac power, zero key, battery operation, hold key, weigh hold settings

AVERY WEIGH-TRONIX

NCI 7820B Portable Bench Scale

Construction
Stainless steel weight platter
Die cast aluminum base and loadbridge
Aluminum handle

Remote Display
6 digit backlit display housed in an extruded enclosure with a 1.5" cable assembly with RJ45 connector. Includes 6" magnetic strip.

Remote Display Enunciators
Zero- indicates the scale is at zero weight
Hold- indicates the weight hold feature is active.
AC power- indicates AC power is connected to the scale and charging the battery

Remote Display Controls
Zero Key- includes 2% Auto Zero tracking or manual push button to reestablish zero reference
Turns the scale OFF, when operated via battery

Hold Key
Enables or disables weight hold feature
Enters into backlit and weight hold setting configuration

Weigh Hold Settings
Single- allows you to hold the parcel weight on the display for one parcel
Auto- allows you to hold the parcel weight on the display for unlimited parcels
Sealed- some states may not accept weight hold in NTEP approved applications. The sealed mode disables the weight feature.

Backlit Settings
Auto- back light turns off after 5 seconds of non use
On- back light is always on
Off- back light is always off

Battery Conservation
Sleep- after 5 minutes of non-use the scale will enter into sleep mode. Pressing the zero key will re-activate the scale.
Auto Shutdown- after 1 hour of non use the scale will shutdown. Pressing the restart button will restart the scale.

Restart Button
While in battery operation mode, the restart button (located on the rear of the scale) turns on the scale

Hard Wired Battery Cable
Battery cable is hard wired to main PCB, no external connections

Battery Life
Stored, no use- 14 days
Back light Off- 40 hours
Back light On- 12 hours
Back light Auto- 24 hours
Re-charge time- 8 hours
Re-charge cycles- 400 minimum

RS232 Interface
9pin using Standard NCI protocol

Field Calibration
Alternate span points, 10 or 50lbs, can simplify field calibration. Can be set up either in decimal pounds or kilograms

NCI 7820B Specifications

Capacity (lb)
200 x 0.05lb
100 x 0.02kg**

Note: Rounding method is scale.
** Metric Weighing can be configured in the field during calibration

Internal Resolution
1 part in 120,000

Dimensions
12" x 19.5" x 4.6" standard configuration
(318mm x 495mm x 117mm)
12" x 14" x 4.1" (318mm x 358mm x 104mm), no handle

AC Power - Inline Transformer, UL/CSA Approved
Input: 120 VAC (+10% - 15%), 60Hz standard 3-wire ground
Output: 14VDC (min) @ 730 mA
DC- 12VDC/1.3AH sealed lead acid battery

Operating Environment

Temperature
42°F to 104°F (5°C to 40°C)

Relative Humidity
10 to 95% (non-condensing)

Agency Approvals
United States: NTEP #95-070
For use as a Class III device

Input/Output
RS232, bi-directional, configurable 1200-19.2K. Transmits weight and scale status whenever a "W" <CR> is sent by remote device.

Scale Weight
16lbs, standard configuration

Shipping Weight
24lbs, standard configuration

Call 800-446-1991 or 513-984-2101 for the RACO Discount Price!

Specifications and pricing subject to change without notice.

Back to NCI Shipping Scale Main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!