PAXAR (formerly MONARCH) BARCODE PRINTERS, LABELERS, ATTACHERS and MORE


Monarch 9855 HF High Frequency RFID Printer and Encoder
(Monarch 9855 HF RFID Printer and Encoder by PAXAR)

Monarch 9855 HF High Frequency RFID Printer and EncoderTrack and move merchandise quickly through your supply chain using many of the most popular HF (13.56MHz) RFID protocols embedded in thermal direct or thermal transfer bar code labels and tags.

Reliable RFID
With the Monarch 9855HF RFID printer and encoder, you'll experience the highest yield performance in the industry. This printer/encoder tests, writes and verifies the RFID chip and gives you complete verification of RFID data. It overstrikes bad labels to alert you right away if the RFID data cannot be encoded.

Versatile RFID
The Monarch 9855HF RFID printer and encoder supports a range of HF protocols including ISO 15693-2, -3, TI Tag-IT, NXP I-Code and ISO-18000-3 and is compatible with a full range of inlays to complement your specific application, including inlay from:

  • Rafsec
  • TAGSYS
  • TI
  • More!

An inlay won't be approved until it meets Avery Dennison's exacting yield standards!

Flexible RFID
The Monarch® Smart Relay™ System automatically manages your mixed environments of RFID and non-RFID labeling to improve productivity and reduce waste when printing both RFID and non-RFID labels within the same application.

Compliant RFID
The Monarch 9855HF Printer meets OSHA requirements for use in a workplace and is FCC certified, RoHS compliant. In addition, Avery Dennison's printer and supply manufacturing processes are ISO-9001 certified.

Connected RFID
The innovative Dual Wireless 802.11b/g/Wired Ethernet network interface card option allows you to run your printers on a wireless network, with the ability to change to a wired connection. Automatically switch from wireless to the wired ethernet port while retaining the IP address and without losing the session, enhancing your productivity.

Monarch 9855 Printer and Encoder Applications

  • Item level retail
  • Pharmaceutical tracking
  • Asset tracking
  • WIP tracking
  • Library tracking
  • Authentication

Monarch 9855 Printer and Encoder Features

  • Encodes HF chips
  • Prints bar code data
  • Thermal direct or thermal transfer
  • On-demand or continuous
  • Prints up to 12ips
  • Optional 300dpi printing
  • Cart ready option available
  • Dual wired/wireless Ethernet available

Monarch 9855 Printer and Encoder Specifications

Dimensions
13.0" H x 12.5" W x 17.3" D
(330mm H x 318mm W x 439mm D)

Weight
29lbs (13.2kg)

Printing Method
Thermal direct and transfer

Printhead
4.0" (102mm/812 dots)
203 dots/inch (8 dots/mm) or
300 dots/inch (11.8 dots/mm)
Both printheads provide enhanced print quality

Operator Interface
32-bit 150 MHz processor

RFID Protocols
ISO 15693-2, -3
ISO 18000-3
TI Tag-It 15693
NXP I-Code
TagSys C270, C370

Memory
4MB Flash, 16MB SDRAM Optional 16MB
Configurable 8MB RAM using these buffers:
Transmit, Receive, Image, Format, Downloadable & Scalable fonts

Bar Code Types
UPC +2/+5, UPCE +2/+5, EAN 8 +2/+5, EAN 13 +2/+5, Interleaved 2 of 5, Extended Code 39, Codabar (NW7), Code 128, Code 93, MSI, PDF417, Postnet, MaxiCode, Code 16K, Quick Response (QR Code)

Standard Fonts
Bitmap-Standard, Reduced, Bold, OCRA-like, CG Triumvirate, and CG Triumvirate Bold TrueType- EFF Swiss Bold Supports downloaded double-byte (True-Type and bitmap) fonts, allowing for Chinese, Japanese, and Korean character sets.

Font Magnification
1x to 7x
4 to 250pt for scalable/ TrueType fonts

PC/Host Interface
IEEE-1284 parallel or Centronics mode
USB (Universal Serial Bus)
RS232 serial at 2,400 BPS to 115,200 BPS
Optional Ethernet, 802.11B wireless card

Performance

Power Source
90-264 VAC with autoselect 50/60 Hz
Optional 24 VDC regulator

Print Speed
2.5ips (64mm) - default for serial bar codes
4ips (102mm) - 203dpi serial bar codes with narrow elements of 3 dots (or greater)
6.0ips (152mm) - default for parallel bar codes
8.0ips (203mm)
10.0ips (254mm)
12.0ips (305mm) only with 203dpi printhead

Supplies

Supply Types
RFID labels, RFID tags, labels, tags and receipt paper

Standard Supply Sizes
Width- 0.75" to 4.25" (19mm to 102mm)
Length- 0.32" to 17.5" (8mm to 445mm)
Supply Roll length is 7,874" (200m) - this varies on material thickness

Supply Thickness
Labels- 5.5 to 10mils
Standard Tags- 5.5 to 10mils
RFID Tags- 7 to 14mils
Receipt Paper- 2.4mils

Maximum Print Area
4.0" x 16.0" (102mm x 406mm) with the 203dpi printhead
4.0" x 13.0" (102mm x 330mm) with the 300dpi printhead
Larger images (up to 16ft) can be printed using continuous supply and reallocating memory

Ribbon Sizes

Ribbon Widths Use with max. supply width
1.5" (38mm) 1.2" (33mm)
1.8" (46mm) 1.5" (38mm)
2.3" (58mm) 2.0" (51mm)
3.3" (84mm) 3.0" (76mm)
4.3" (110mm) 4.0" (102mm)
TUFFMARK 2.3" (58mm), 4.3" (110mm), 2.0" (51mm) and 4.0" (102mm)

Ribbon Length
23,616" (600m)

About Ribbons
The width of the ribbon must be at least 0.3" (8mm) greater than the supply width. Using a ribbon wider than your supply helps protect the printhead.

Environmental

Operating Temperature
Thermal transfer: 40°F to 95°F (4°C to 35°C)
Thermal direct: 40°F to 104°F (4°C to 40°C)

Storage
15°F to 120°F (-10°C to 49°C)

Humidity/Operating and Storage
5% to 90% non-condensing

Electrostatic Discharge and Air Quality
Some problems with electronic equipment may occur in environments prone to static discharge or extreme dust conditions. Paxar suggest that you take precautions to minimize these problems.

Options
926™ knife
300dpi printhead
12ips print speed
Peel mode with on-demand sensor
Ethernet print server
Dual 802.11b wireless and Ethernet Print Server
ADK Script Programming for special applications
16 MB Flash memory expansion
MonarchNet2
Monarch Smart Relay system
Cart ready
XML for Oracle WMS interface
XML for SAP RFID AII interface

Accessories
935™ Rewind
938™ Verifier (Bar Code)
939™ Keyboard
939I™ Intelligent Keyboard

Monarch 9855 Printer and Encoder LIST Pricing:

Part # Description List Price
Call for Discounts!
M09855HF Base model 9855 printer with HF 13.56 MHz encodder, metal cover, 10ips, 203dpi printhead, RS232 serial, USB, parallel ports, 150MHz, 32bit RISC microprocessor, 4MG Flash, 16MG SDRAM, 13.56 MHz RFID $3,995
  High speed option, 12ips thermal direct/transfer $420
  Memory expansion, 16MB Flash memory expansion (factory installed only) $315
  Post-Print Option, peel with on-demand sensor $210
  Post-Print Option, knife option- model 926 ships installed on printer
Note: knife not available with MLI		 $1,390
  Communications, Ethernet $295
  Communications, Dual 802.11b wireless and wired Ethernet - for metal cover machines $595
  Verifier-Ready, internal electronics to support verifier (not available with MLI) $32
  Printhead, 300dpi (not available with MLI) $210
  Custom software or formats, download charger per printer. Note: development charge is quoted separately $50
  ADK Script, download charger per printer (not available with MLI)
Note: development of ADK script is quoted separately.		 $50
  XML Enabled, Oracle WMS Schema $210
  XML Enabled, SAP for RFID all interface $210

Call 800-446-1991 or 513-984-2101 for the RACO Discount Price!

Specifications and pricing subject to change without notice.

Back to Monarch Printing Systems, Electronic Labelers and Software

Back to Monarch

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.