|
|
|
|
LOGIC CONTROLS
LC8200 Industrial Computer
|
  |
|
 |
|
Home >
Category >
Point of Sale >
Logic Controls >
LC8200 Series Industrial Computer |
Fanless and Reliable
Industrial computers need to be reliable, as they often are
used for mission critical applications and not placed in an
office environment. The Logic Controls LC8200 provides
unparalleled reliability by being a fanless unit. It is an
ideal computer for use in harsh environments with high
levels of dust or oil or when fan noise is not desirable.
For enhanced reliability, all of the computer components and
connectors reside on one PC board. The Logic Controls
LC8200’s single board computer limits the number of internal
cables, a common source of loose connections and failures. A
true no-moving-part operation is provided when compact flash
is used for mass storage or boot-from-network configurations
are employed.
Ultra Compact & Rugged
The Logic Controls LC8200 has a very compact form factor –
only 2”H x 8”W x 6”D. Two mounting brackets enable these
modules to be mounted almost anywhere – on a wall, ceiling,
table top or under a counter. The computer is housed in a
rugged die cast case for extra protection.
Full Compliment of I/O
Ports
The Logic Controls LC8200 also provides a very impressive
compliment of up-to-date and legacy I/O ports. Up to 4
serial, 4 USB 2.0, 2 independent SVGA, 1 parallel, 1
Ethernet, 1 PS/2, microphone and speaker ports are all
available. Hence industrial applications that require serial
or parallel interfaces are fully addressed. The Logic
Controls LC8200 also uses Intel-compatible, Pentium-class
processors, so it can run Windows and Linux-based
applications. Whether your application runs on Windows XP,
Windows XP embedded, Windows 2000, Windows CE or Linux, your
operating system needs are supported by the Logic Controls
LC8200. This enables the unit to be used in a wide variety
of applications – in a restaurant’s kitchen system, in a POS
workstation, in an auto ID workstation, etc.
- Fanless operation
- Intel Celeron-M 800MHz to 1GHz
- Ultra compact - only 2" H x 8" W x 6" L
- Mass storage: Compact flash or/and hard disk drive
- Enclosed in rugged die cast case
- 128MB to 1GB SODIMM RAM
- No internal connecting cables and no internal moving parts
for ultimate reliability with CF mass storage
- Large number of available I/O ports: 4 USB 2.0, 4 serial, 1
VGA, 1 Ethernet, 1 PS/2 keyboard/mouse, 1 LPT, speaker out,
microphone in, power input
- Multimedia: 1280x1024 resolution with 32 bit color, AGP 4x,
MPEG-2 decoding and video, integrated 128bit 2D and 64bit
graphics engine, AC97 Audio CODEC
- System boot from CF, HDD, USB or network
- Power: Wide range of input voltages, 9 to 24VDC, suitable
for mobile applications
- Custom configurations available
|
|
|
