Logic Controls LC8000 industrial computer, fanless unit, for harsh environments with high levels of dust, oil or where fan noise is not desirable, POS computer, true no moving part operation, boot from network configuarations available

LOGIC CONTROLS

This product is no longer available, please view the Logic Controls main page for more product choices like the Logic Controls LC8200 Industrial Computer.

-----------------------------------------------------------

Logic Controls LC8000 Series Industrial Computer

Fanless and Reliable
Industrial computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC8000 provides unparalleled reliability by being a fanless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, all of the computer components and connectors reside on one PC board. The LC8000’s single board computer limits the number of internal cables, a common source of loose connections and failures. A true no-moving-part operation is provided when compact flash is used for mass storage or boot-from-network configurations are employed.

Ultra Compact & Rugged
The LC8000 has a very compact form factor – only 2”H x 8”W x 6”D. Two mounting brackets enable these modules to be mounted almost anywhere – on a wall, ceiling, table top or under a counter. The computer is housed in a rugged die cast case for extra protection.

Full Compliment of I/O Ports
The LC8000 also provides a very impressive compliment of up-to-date and legacy I/O ports. Up to 4 serial, 4 USB 2.0, 2 independent SVGA, 1 parallel, 1 Ethernet, 1 PS/2, microphone and speaker ports are all available. Hence industrial applications that require serial or parallel interfaces are fully addressed. The LC8000 also uses Intel-compatible, Pentium-class processors, so it can run Windows and Linux-based applications. Whether your application runs on Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by the LC8000. This enables the unit to be used in a wide variety of applications – in a restaurant’s kitchen system, in a POS workstation, in an auto ID workstation, etc.

Logic Controls Features

Fanless operation

Intel-compatible CPU 533MHz to 1GHz

Ultra compact - only 2" H x 8" W x 6" L

Mass storage: Compact flash (no moving parts) or/and hard disk drive

Enclosed in rugged die cast case

128MB to 256MB RAM

No internal connecting cables with all components mounted on single PC board for ultimate reliability

Large number of available I/O ports: 4 USB 2.0, 4 serial, 2 SVGA, 1 Ethernet, 1 PS/2 keyboard/mouse, 1 LPT, speaker out, microphone in, power input

Multimedia: 1280x1024 resolution with 32 bit color, AGP 4x, MPEG-2 decoding and video, integrated 128bit 2D and 64bit 3D graphics engine, AC97 Audio CODEC

System boot from CF, HDD, USB or network

Power: Wide range of input voltages, 9 to 24VDC, suitable for mobile applications

Custom configurations available

Logic Controls Specifications

Processor
VIA 533MHz to 1GHz

Memory
128MB to 512MB DDR

Hard Drive
Internal Compact Flash, 64MB to greater than 4GB
Optional internal IDE 2.5" hard drive (20GB up)

Primary Video
1280x1024 pixels max, 32bit color, AGP 8X, MPEG-2, 128bit 2D and 64bit 3D graphics engine, 64MB max shared video memory

Secondary Video (optional)
1024x768 pixels max, 24bit color, 4MB video memory

Network Interface
10/100 Base-T Ethernet, Network boot capable

Keyboard/Mouse
PS/2 compatible

USB Port
USB 2.0 (4 ports), USB boot capable

Serial Port
COM1, COM2, COM3 (optional), COM4 (optional, internal connector)

Parallel Port
LPT1

Audio
Speaker-out and Mic-in, AC97 Audio CODEC

Electrical (external switching power adapter- included)

Input
100 to 240VAC

Input Frequency
47 to 63Hz

Input Currency
<1.5A @ 120VAC

Output
+12VDC / 3.3A
LC8000 can accept an input voltage range from 9 to 24 VDC

Ripple Voltage
< 120mVp-p

Mechanical

Weight
3.0lbs

Dimensions
8.0" W x 6.3" L x 2.0" H

Housing
Die cast

Environment

Operating Temperature
5°C to 40°C

Relative Humidity
8 to 80% non condensing

Storage Temperature
0°C to 60°C

Relative Humidity
5 to 80% non condensing

Connectors

SVGA
Standard, DB15 male connector

Keyboard and Mouse
PS/2 mini-DIN6 female connector

RS232
Standard DB9 male connector

USB
Standard USB type-A connector

Ethernet
RJ45 8pin female connector

Audio
Speaker out/Mic in phone jacks

Parallel
Standard, DB25 female connector

DC Power
Shielded snap lock mini-DIN with EMI/RFI suppression, 3pin female connector

Part # Description

LC8012 LC8000 1GHz Proc 256MB RAM, no storage or O/S

LC8012-30-XPP LC8000 w/1GHZ processor 256MB RAM, 30GB, Windows XP Pro

LC8071 LC8000 733MHz 128MB RAM, no storage or O/S

LC8071-128-PL LC8000, 733MHz processor, 128MB RAM 128MB comp. flash, Puppy Linux

LC8072 LC8000 733MHz 256MB RAM, no storage or O/S

LC8072-128-PL LC8000 733MHz processor, 256MB RAM 128MB comp. flash, Puppy Linux

LC8072-1GF-XPE LC8000, 733MHz 256MB DDR 1GB Flash, Windows XP embedded

LC8072-30-XPP LC8000, w/733MHz 256MB RAM, 30GB, Windows XP Pro

Call 800-446-1991 or 513-984-2101 for the RACO Discount Price!

Specifications and pricing subject to change without notice.

Back to Logic Controls main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!