Logic Controls LD3000 Series
The Logic Controls LD3000 has a sleek
single-sided display, while the LD3000X is a stylish double-sided
display (each side can display the same or different messages). Double
sided pole displays eliminate the need for monitors, thus saving space
and lowering system cost.
Available in beige or dark
gray.
Logic Controls LD3000 Features
-
Overall height of 8" to 24"
-
5.0mm character height
-
Bright blue-green
fluorescent display
-
Two-line display with 20
characters per line
-
USB interface available
-
Intelligent serial pass-thru
and parallel models available
-
Available in many popular
command sets and OPOS
-
Automatic smart message
scrolling
-
User definable character
-
Supports high speed
protocol: up to 19.2k bps, 1 stop bit
-
Matched optical lens for
better viewing contrast
-
Ergonomic design
-
Adjustable rotation and tilt
angles
-
Offset mounting and pole
height options
-
Available with 120V or 220V
power adapters
Available models
Logic Controls
LD3000
Display, 5.0mm, Blue-green vacuum fluorescent, 2x20
characters, RS232 interface, DB9F connector, Logic Controls Command set,
manual, mounting plate, 120 VAC adapter
Logic Controls LD3000X
Double sided pole display, 5.0mm, Blue-green vacuum
fluorescent, 2x20 characters, RS232 interface, DB9F connector, Logic
Controls Command set, manual, mounting plate, 120VAC Adapter
Specifications
Optical
(fluorescent display)
Digits per row
20
Number of rows
2
Digit configuration
5x7 dot matrix
Digit height
0.20" (5.0mm)
Digit width
0.14" (3.5mm)
Digit pitch
0.20" (5.0mm)
Character configuration
ASCII
Brightness
690 cd/m2 typical
Display color
Green-blue
MTBF
300,000 hours
Electrical
Input power (to adapter)
120VAC, 60Hz
220VAC, 60Hz (optional)
Output power (from
adapter)
6.0VAC, 1A
Connector
2 conductor female jack
Pole Connector
8pin Mini DIN (male)
Interface
cable
Pole side connector
8pin Mini DIN (female)
Computer side connector
DB9 (female); optional DB25 (female)
Power connector
2 conductor male jack
Environmental
Operating temperature
0° to +50°C
Storage temperature
-20° to +70°C
Relative
humidity
Operating
85% max non condensing
Non-operating
90% max non condensing
Vibration (10 to 55Hz)
4 Gs
Shock
40 Gs
Interface
Serial
RS232C
Protocol
Baud rate
600, 1200, 2400, 9600*, 19,200
Data bit
8
Parity
None
Stop bits
1, 2*
RTS/CTS Control lines are
tied together in the connector.
DSR/DCD/DTR Control lines are tied together in the connector
Parallel
Pass-thru
* Default preset at factory
Optional interface
Optional serial or parallel
General information
Power adapter and 6 foot cable (with DIN 5M and DB9F connectors) are
supplied with product.
Pole display emulation
The LD3000 series pole displays are very versatile. They can emulate
many other pole display command sets
Mechanical
Weight
2.7lbs
Dimensions (in inches)
(W x H x D)
Fluorescent display
8.50 x 3.37 x 1.75/ 2.25
Rectangular base
2.0 x 2.25 x 2.12
Base plate
4.00 x 0.90 x 8.00
Overall height
8 to 25"
Connector pinout
|
Serial |
|
DB9
female connector |
| Pin# |
Function |
| 1 |
DCD |
| 3 |
Data |
| 4 |
DTR |
| 5 |
Ground |
| 6 |
DSR |
| 7 |
RTS |
| 8 |
CTS |
|
DB25 female connector |
| Pin# |
Function |
| 2 |
Data |
| 7 |
Ground |
| 4 |
RTS |
| 5 |
CTS |
| 6 |
DSR |
| 8 |
DCD |
| 20 |
DTR |
|
Parallel |
|
DB25 male connector |
| Pin# |
Function |
| 1 |
-Strobe |
| 2 |
Data 0 |
| 3 |
Data 1 |
| 4 |
Data 2 |
| 5 |
Data 3 |
| 6 |
Data 4 |
| 7 |
Data 5 |
| 8 |
Data 6 |
| 9 |
Data 7 |
| 10
|
-ACK |
| 11 |
Busy |
| 12 |
Paper end |
| 13 |
Select |
| 14 |
-Auto feed |
| 15 |
-Error |
| 16 |
-Initialize
printer |
| 17 |
-Select
input |
| 18-25 |
Ground |
Ordering Information

Call 513-984-2101
or 800-446-1991 for the RACO discount price!
Specifications subject to
change without notice.