LOGIC CONTROLS


Logic Controls MR1000 Series Mini-magnetic stripe readers   Logic Controls MR1000 mini-magnetic stripe reader

Fits almost anywhere
The Logic Controls MR1000 Series MSR is only 100mm long and can fit almost anywhere, making it ideal for POS and desktop applications. Whether it is used stand alone or attached to a monitor, touchscreen or all-in-one unit, the Logic Controls MR1000 provides the functionality needed with an extremely small form factor.

Easily programmable
The Logic Controls MR1000 Series MSR is easily programmable through the programming utility’s intuitive graphical user interface. By simply clicking on buttons and entering parameters, an integrator can easily set up the Logic Controls MR1000 for use with a minimal investment in time and training. It is easy to enable/disable tracks, change start and stop sentinels, and add prefixes, field terminators and suffixes. A built-in decoder reads all combinations of tracks 1, 2 and 3. The Logic Controls MR1000 Series MSR also supports a wide range of reading speeds and includes special firmware to avoid transmission errors due to bus contention.

Reliable and low cost
The Logic Controls MR1000 Series MSR is both extremely reliable and affordable. It uses the latest technology that provides reliability and speed that is superior to other products. The reading head lasts longer than 1 million cycles and can read with a swipe made in either direction. A dual color LED light and a programmable beep indicate a good or bad read. A stainless steel card guide is used for an extra smooth swipe. All units also receive full functional and quality control testing before leaving Logic Controls facilities. Best of all, this high quality unit is available at a price that easily fits into any budget.

  • Small size perfect for POS and desktop applications
  • Easy, GUI-based programming
  • Built-in decoder reads all combinations of tracks 1, 2 and 3
  • Stainless steel card guide for extra smooth swipe
  • Bi-directional reading head that lasts > 1 million swipes
  • Two color LED and programmable beep indicate good/bad read
  • Supports wide range of reading speeds
  • Supports USB, PS/2 and RS232C interfaces
  • Operates with or without keyboard attached
  • Avoids transmission errors due to bus contention

Logic Controls MR1000 Series MSR Specifications

Weight
0.4lbs

Height
1.23"

Width
1.28"

Length
3.94"

Magnetic head

Number of tracks (MR1000)
2 (any combination of tracks 1 and 2)

Number of tracks (MR1300)
3 (any combination of tracks 1, 2 and 3)

Track width
1.4mm

Core material
Permalloy or Sendust

Life
>1,000,000 passes

Card feed

Speed
100 to 1200mm/sec

Force
90g typical, 180g max

Direction
Bi-directional

Electrical

Supply voltage
+5VDC

Supply ripple
100mv p-p max.

Current
30mA max

Environmental

Operating temperature
-10° to +55°C

Storage temperature
-30° to +70°C

Relative humidity

Operating
10 to 95% non condensing

Non-operating
10 to 95% non condensing

Vibration (10 to 55Hz)
4Gs

Shock
30Gs

Interface

Wedge interface
RS/2 standard (AT optional)

USB
HID keyboard

Serial
RS232C

Protocol

Baud rate
2400, 4800, 9600*, 19200

Parity
None*, Even, Odd

Data bits
7, 8*

*Factory default value

Logic Controls MR1000 Series MSR Connector pinout

Keyboard wedge

Mini-DIN 6F
(to keyboard)
Mini-DIN 6M
(to computer)
USB Type A
Connector
RS232
DB9 female connector
Data 1 Data 1 +5VDC 1 Tied to 4 & 6
2 No connection 2 No connection 2 D- 3 Data
3 Ground 3 Ground 3 D+ 4 Tied to 1 & 6
4 +5VDC 4 +5VDC 4 Ground 5 Ground
5 Clock 5 Clock     6 Tied to 1 & 4
6 No connection 6 No connection     7 RTS
            8 CTS

Logic Controls MR1000 Series Mini-magnetic:

Model Description
MR1000 Mini-Magnetic stripe reader, tracks 1 & 2 enabled, fully programmable, keyboard wedge interface, PS/2 cable
MR1000RS Mini-Magnetic stripe reader, tracks 1 & 2 enabled, fully programmable, RS232 interface
MR1000U Mini-Magnetic stripe reader, tracks 1 & 2 enabled, fully programmable, USB interface keyboard emulation
MR1300 Mini-magnetic stripe reader, tracks 1, 2 & 3 enabled, fully programmable, keyboard wedge interface, PS/2 cable
MR1300RS Mini-magnetic stripe reader, tracks 1, 2 & 3 enabled, fully programmable, RS232 interface
MR1300U Mini-magnetic stripe reader, tracks 1, 2 & 3 enabled, fully programmable, USB interface keyboard emulation
Accessories
MA-PA-120 Power adapter for RS232 120 VAC / 5VDC

Specifications subject to change without notice.


Back to Logic Controls main

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.

© Logic Controls products are copyrights/trademarks of Logic Controls, Inc.

Microsoft, Microsoft Windows, Microsoft Visual, Microsoft Visual C/C++, Visual, Windows, Microsoft C, Microsoft C++, Microsoft Windows 3.x, Windows 3.x, Windows 95, Windows 2000, Windows NT are trademarks/copyrights of the Microsoft Corporation.

iMac, Apple iMac, Mac, Macintosh, Macintosh computers are trademarks/copyrights of the Apple Computer, Inc.