LabelMate TWIN-CAT-2 dual spindle unwind and rewind station, Labelmate label unwinders, labelmate label rewinders, labelmate twin-cat-2, pc-1 counter, twin-cat-2 with 2 ach, core holders, powerful motors, label counters

LABELMATE REWINDERS and UNWINDERS

LABELMATE TWIN-CAT-2 Dual Spindle Unwind/Rewind Station

The world’s easiest solution for wind-in / wind-out, label reversing and inspection applications.
Here is LABELMATE's Dual-Spindle Heavy Duty Unwinder/Rewinder, the TWIN-CAT-2. Wtih two powerful motors and your choice of Core holders you have maximum versatility. Each spindle can rewind or unwind. You control the direction and torque on each Spindle independently. An External Halt Control allows you to STOP and START the TWIN-CAT-2 with a Foot Switch, Label Counter or other external device if desired. A worldwide, universal Heavy-duty Power Supply is included.
Some of the many possible applications:

Conveniently rewind labels onto a different Core size. With universal Adjustable Core Holders you can unwind from any diameter Core and rewind onto any diameter Core within the range of 1" to 4"! Great production shops with varied jobs.

Add the Label Inspection option to create a stand-alone Inspection Station.

Add a Label Counter to create an all-in-one Inspection and Counting Station. (see below)

Wind small rolls of labels from larger ones.

Set up an inline slitting operation with a LABELMATE S-100 or S-200 Slitter at your printer output.

Strip unwanted matrix from die-cut labels for easy disposal as you rewind them.

Add a Label Counter to create an all-in-one Inspection & Counting Station.

Please refer to the table below to specify your TWIN-CAT-2:

"TWIN-CAT-2, [Core Holder Order Number] Upper Spindle, [Core Holder Order Number] Lower Spindle." Add Inspection and Counter options if desired. Please see information below.

You must

NEW!
Lower Price

TWIN-CAT-2

Base Price Now Just $995

Please specify two Core Holders.
Core Holder Type Core Diam Max Width # of Flanges Order # List Price ea.
Call for Discounts!

Coreless NA 6" (152mm) 1 SHAFT, TC-CL $150

Fin Style 1"
(25.4mm) 6" (152mm) 2 SHAFT, TC-1" $125

3"
(76mm) 6" (152mm) 2 SHAFT, TC-W6 $150

3"
(76mm) 10" (254mm) 2 SHAFT, TC-W10 $200

Continuously Adjustable 1" to 4"
(25-100mm) 6" (152mm) 1 ACH-TC2
Cannot mix* $250

"Quick-Chuck" Quick-locking Core Chuck 1.5" (38.1mm) 6.7" (170mm) 1 C-1.5-170 $295

1.5" (38.1mm) 10.6" (270mm) 1 C-1.5-270 $395

40mm (1.57") 6.7" (170mm) 1 C-40-170 $295

70mm (2.76") 6.7" (170mm) 1 C-70-170 $295

3" (76mm) 6.7" (170mm) 1 C-76-170 $295

3" (76mm) 8.5" (220mm) 1 C-76-220 $365

3" (76mm) 10.6" (270mm) 1 C-76-270 $395

4" (102mm) 6.7" (170mm) 1 C-100-170 $345

4" (102mm) 8.5" (220mm) 1 C-100-220 $425

4" (102mm) 10.6" (270mm) 1 C-100-270 $495

Optional: Dual control Low-Torque Option for delicate label webs. LTO-TC2 $200

*The ACH-TC2 cannot be mixed with any other type of Core Holder. The ACH-TC2 is not suitable for slitting applications.

All TWIN-CAT-2 Models operate at up to 30" per second. Each Spindle allows roll diameters up to 8.6" (220mm). For delicate label webs a Dual Control Low-Torque Option is available at $200. Model LTO-TC2.

The Label Inspection option, INSP-1, adds a handy Label Inspection Fixture to the side of your TWIN-CAT-2. It has two rollers over which your labels run as they are presented for inspection. You can also wind-in or wind-out at the same time as you perform the inspection operation. If you want to, when inspection is complete, you can conveniently rewind the labels back onto their original core by just reversing the direction of the Rewind Spindles.

You can also order a PC-1 Label Counter on your Inspection Station to count the labels as they pass a sensor on the Inspection Fixture. The PC-1 counts single- or multiple-across labels. Counts up or down and you can preset a batch size. Includes a Halt Control Cable to optionally stop your TWIN-CAT-2 automatically when your job is finished.

Description Model Width (Max) List Price
Call for Discounts!

Optional Inspection Fixture mounts in minutes on the side of your TWIN-CAT-2. Includes two rollers that your labels glide over as they are presented for inspection. Bi-directional, variable speed operation of the TWIN-CAT-2 allows control over winding tightness as well. Can be started and stopped with the optional Foot Switch listed below.
INSP-6 6" (152mm) $195

INSP-8 8" (203mm) $225

INSP-10 10" (254mm) $255

Optional Digital Preset Counter pre-mounted on the INSP-1 Inspection Fixture ready to plug in and use. Adjustable counter sensitivity. Includes an External Halt Cable to stop the TWIN-CAT-2 when the desired Count is reached. The PC-3 counts multiple-across labels as well as single-across labels.
PC-1
(non-scaling) NOTE: INSP is required for these Counter Options. $395

PC-3 (scaling) $495

Optional Push-to-Run Foot Switch for the TWIN-CAT-2. Operates the External Halt Control on the TWIN-CAT-2. To use the Foot Switch at the same time as the Automatic Stop feature of either of the Preset Counters you must also order the FSPC1-TC2 Option immediately below.
FOOTSWITCH - $75

Option permits simultaneous use of the Foot Switch and Automatic Stop Feature of the PC-1 Preset Counter.
FSPC-TC2 - $175

TWIN-CAT-2 with one gear motor in upper position, one tension motor in lower. Permits tensioning the label web when the TWIN-CAT-2 is stopped. (LTO-TC2 is not available for TWIN-CAT-2G). NEW!
TWIN-CAT-2G Base price. You must specify two Core Holders $1,595

Call 800-446-1991 or 513-984-2101 for the RACO Discount Price!

Specifications and pricing subject to change without notice.

Back to LABELMATE Main Page

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!