Call for the RACO Discount Price at
513-984-2101 or 800-446-1991
|
|
|
|
LABELMATE
Burster Bar
|
  |
|
|
LABELMATE
LABELMATE Burster Bar Splits Perforated Tags
The LABELMATE BURST-180 Burster Bar provides a means of splitting
and rewinding perforated paper or plasticized tags and labels used
in the lumber and other industries. Unfortunately, slitters don't
work well for this application as the cutting blades tend to get
caught on the edges of the tag and cause uneven cuts or other
problems. Now, LABELMATE has an inexpensive solution for use in
conjunction with a CAT-2-CHUCK Label Rewinder.
The LABELMATE BURST-180 Burster Bar can be installed directly
onto the CAT-2-CHUCK Rewinder in a matter of minutes. Two smooth
Bursting Rods extend 180-mm (7") across the label path. The labels
or tags to be burst can come from either a printer or from a label
unwinder. The tags are threaded over and under the Bursting Rods and
onto individual rewind cores on the CAT-2-CHUCK. To make removal of
the burst rolls easy, use Label Separator Plates in between the
rewound rolls.
In "off-line" applications using a Label Unwinder, bursting can
be done at maximum rewind speed. In "in-line" applications at the
output of the printer, the CAT-2-CHUCK Rewinder will track the speed
of the printer and burst and rewind the tags as they come out of the
printer. The BURST-180 Burster Bar can be mounted on the CAT-2-CHUCK
for either left-hand or right-hand operation and can be left in
place when doing normal label rewinding.
| Model |
Description |
Width |
Roll Diam |
| BURST-180 |
The Burster Bar attaches to you r
CAT-2-CHUCK Rewinder to conveniently burst perforated tags
and labels. Use "in-line" with your printer or "off-line"
with your Unwinder and your Rewinder |
Up to 6" |
Up to 8.6" |
BURSTER BAR splits perforated tags
and labels. Ideal for plasticized lumber tags!
Back to LABELMATE main
|
|
