Digital Design Evolution III High Resolution Ink Jet Printer Series
EVOLUTION I I I
takes High Resolution Ink Jet Printing
to the next level. It features a 7 inch full color
touch screen controller combined with a complete
software package and the ability to print up to one
inch high alpha/numeric characters as well as barcodes
and graphics up to two inches in height. It
includes a variety of font styles and sizes which
can be used in a total print area of 2 inches high
by 24 inches in length.
A Complete System
EVOLUTION I I I is complete and ready to install right out
box. The system includes a full color touch screen
with stylus for message entry, one printhead module with
internal product sensor, power supply for up to four
printheads, and the mounting bracketry.
Thermal Inkjet Technology by Hewlett Packard
Designed by Digital Design, the EVOLUTION I I I is powered
with thermal ink jet technology (TIJ) by Hewlett Packard.
This combination gives you the benefits of an affordable,
compact, and efficient design coupled with the reliability
printhead technology by Hewlett Packard.
Optimum Print Resolution
EVOLUTION I I I delivers bold, highly legible and fully
characters in a print resolution of 300 dpi at production
speed of up to 200 feet per minute.
Customized Print Area
Stitching four of the EVOLUTION III printheads gives
you a total print area of 2"
high by 24" long. Text,
graphics and barcodes
can be printed in any combination
of font styles and
character heights that are
resident in the Evolution III controller.
Positioning of the text or graphics is easily accomplished
touching the screen with the stylus and creating either a
box or graphics area.
Built into the cartridge is a 42 cc ink supply. Once the ink
the cartridge is depleted, it can be taken out, disposed of
and a new ink cartridge inserted in just minutes.
The EVOLUTION I I I is capable of controlling up to 8
printheads, with 4 on each side of the production line. The
4 printheads on the opposite of the line can only print the
same message as those on the primary side. Each side of
the production line will require a power supply and mounting
bracket. One printhead module, mounting bracket and
one power supply is included with
the initial printer.
Adding another printhead is as simple
as sliding it on. You can attach
up to three additional printheads on
a single bracket by inserting the
dovetail slide on one into the dovetail
slot on the other. Once the
printheads are attached to one another,
the optional printhead alignment
tool can be used to align the
printheads for stitching applications. A small RS 485 data
cable is then used to connect the modules. This allows the
touch screen controller to network all of the printheads on
the production line.
Font Styles Character
Heights and Graphics
EVOLUTION I I I is supplied with four built in font styles.
alternative fonts are available and can be
downloaded into the controller through flash card media.
Logos are another option, and up to 6 can be stored in the
controller. Logos can be printed up to 2” in height.
There are 12 built in barcode symbologies included and
can be printed up to 2” high, The barcode software in the
controller allows you to set the quiet zone, bar width,
spacing, human readable information and more.
Up to 3 different barcodes can be printed within
the same message.
A 7 inch full color touch screen controller with stylus for
entry. One high resolution printhead module with power
supply, Internal product sensor and complete mounting
for side coding applications.