NOTE:
Effective August 10, 2007, Denso TD Scan will no longer sell product or
provide service in North America. RACO will offer product until June of
2008. RACO will provide warranty and service work until September of
2011. For Denso TD Scan products or assistance finding an alternate
product, please call
(800) 446-1991.
This product is no longer
available, please visit the
DENSO TD SCAN (U.S.A)
main page for more
selections or contact RACO Industries for more choices.

----------------------------------------------
DENSO TR26 Bar Code Scanner

Compact and
lightweight
Near Touch or Distance reading ensures successful bar code reading
performance
Features
Compact & lightweight
The DENSO TR26 unit including cable weighs about 129g
(4.2oz). Having a straight body shape in addition to compact and
portable features, the DENSO TR26 works effectively for portable bar
code data collection.
Distance reading function for wider bar code
For bar code wider than the reading window, the DENSO TR26
should be held at a distance from the bar code.*
* The TR26 can read bar codes up to 100mm (3.9") wide where an
ambient illuminance is 500 lux min., PCS value is 0.9min., a narrow bar
is 0.33mm (13.0mils), and a depth of field is 50mm (2.0").

Lower power consumption
Decreased power consumption has been achieved by employing a
CCD image sensor which operates from a single 5V power source and other
features.
The DENSO TR26 for
instance is a powerful tool when connected to battery driven devices
such as hand-held terminals. Another model version which operates with a
power of 2.7V min. is also available and it can be attached to devices
operating from a lower voltage.
Reading confirmation LED
for assured scanning
The green flashing LED and beeper confirm a successful reading.
Programmable by bar code
menu
With a simple bar code menu, the DENSO TR26 can be programmed for
different scanning conditions including bar code symbologies, data
transmission formats, communications protocols, trigger switch control,
beeper ON/OFF control, etc.
General
Specifications
|
Scanning Unit |
Trigger switch |
Yes |
|
Max readable width |
Contact |
61mm (2.4")
(including right/left quiet zones) |
|
Distance |
Depending on
conditions (see field of view below). |
|
Readable bar code types |
EAN-13/8,
UPC-A/E, UPC/EAN with supplemental codes, Interleaved 2 of 5 (ITF),
Standard 2 of 5 (STF), CODABAR Code 39, Code 93, Code 128 |
|
Resolution |
0.15mm<0.125mm> (5.9mils <4.9mils>) *1 |
|
Reading direction |
Bi-directional |
|
PCS value |
10.45min |
|
Light source |
Red LED
(Wave length= 660nm) |
|
Reading sensor |
CCD |
|
Reading confirmation |
Green, LED,
beeper |
|
Communication Interface |
Interface |
CMOS
asynchronous, CMOS bar image, RS232C |
|
Cable |
Straight,
coiled |
|
Connector |
Mini DIN 6P |
|
Input power |
Operating voltage range |
standard
model |
4.75 to 5.25V |
| low voltage
model |
2.7 to 6.0V |
|
Current consumption (5.0V DC) |
reading mode |
45mA typ. *2 |
| stand-by mode |
100 micro-A max *2 |
|
Environment |
Operating temperature range |
0° to 40°C (32°F to 104°F) (no
condensation or freezing) |
|
Operating humidity range |
10 to 90% RH
(no condensation or freezing) |
|
Ambient illuminance range |
Contact |
3000 lux
max. (under daylight fluorescent light) |
|
Distance |
500 to 20000
lux (under daylight fluorescent light) |
|
Weight (including cable) |
120g (4.2oz) |
|
Trigger switch modes |
4 modes
selection (auto-off switch, momentary switch, alternate switch,
continuous reading) |
*1 : Values in <>
can be realized when bar code is 40mm (1.6") wide and the PCS value is
0.90 min.
*2 : CMOS asynchronous interface