This product is no longer available. Please call 513-984-2101 or 800-446-1991 to speak to a RACO representative for replacement scanners or other available Datalogic products.

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

  

--------------------------------------------------------------------------------------------------------------------

Datalogic DLL5010-M The Shark Hand-held laser scanner

The Datalogic DLL5010-M presents a leap forward in laser scanning technology.
Continuing on the successful path traced by the Datalogic DL910 in regards to its unique design and ergonomy, Datalogic launches a new laser reader studied to address specifically RETAIL, OFFICE AUTOMATION and light LOGISTICS applications.
Based on observations and extensive biomechanical engineering, the Datalogic Datalogic DLL5010-M is designed to be easy-to-use, comfortable to hold, and intuitive to operate in both standing or sitting situations. Its design is pleasant to eye and light in hand, yet, at the same time, very robust. It can resist repeated drops onto a concrete surface from up to 1.5 m.
A choice from two different scanning engines guarantees the best possible solution to a specific application. The General Purpose (G.P.) model is designed to be a versatile solution for the retail and office automation sectors. The Very High Density (V.H.D.) model is able to read codes down to a narrow bar width of only 0.06 mm (2.5 mils)! It is therefore ideal for use in the electronics and pharmaceutical industries. An integrated multistandard decoder is standard in all models and provides reliable reading of damaged and even marginal specification codes. Plus, the three interface possibilities (Pen Emulation, RS232 and Wedge) and plug-in cables allow integration into any system.

Features

• MULTISTANDARD ARCHITECTURE

• Ergonomic and lightweight design

• Multistandard decoder (RS232, Wedge, and Pen emulation in a single model)

• General purpose and very high density models

• Advanced optic technology

• User-friendly setup

• Low power consumption

• Excellent reading performance

• OLE for POS compliance

• Sm@rtSet™: Hand Held Readers Management Software

Applications
Data collection in commercial and office automation environments:
-EPOS
- Libraries
- Pharmacies
- Banks
- Insurance companies
- Rental companies data collection in light industrial environments:
- Work-in-progress
- Production control

Models and accessories

Models

• DLL5010-01
  General purpose scanning engine with push button, TTL/Laser output
• DLL5010-M1
  General purpose scanning engine with push button, multistandard decoder
• DLL5012-M1
  Very High Density scanning engine with push button, multistandard decoder

Accessories

• CAB340
  RS232 coiled cable, 9-pin female connector (DCE config.)
• CAB341*
  RS232 coiled cable, 25-pin female connector (DCE config.)
• CAB342**
  IBM PS/2 wedge coiled cable, minidin connector
• CAB344
  IBM AT/XT wedge coiled cable, din connector
• CAB343
  Pen emulation coiled cable, 9-pin male connector
• CAB339
  TTL/Laser straight cable, 9-pin male connector
• CAB337
  RS232 straight cable, 9-pin female connector (DCE config.)
• CAB333*
  RS232 straight cable, 25-pin female connector (DCE config.)
• CAB329*
  RS232 straight cable, 25-pin male connector (DTE config.)
• CAB330
  IBM PS/2 wedge straight cable, minidin connector
• CAB331
  IBM AT/XT wedge straight cable, din connector
• CAB334
  IBM vdt. 31xx, 32xx, 37xx wedge straight cable, din 240ˇĆ connector
• CAB335
  IBM vdt. 3151, 34xx wedge straight cable, 8-pin telephone connector
• CAB336
  IBM vdt. 3153 wedge straight cable, 6-pin telephone connector
• CAB332
  Pen emulation straight cable, 9-pin male connector
• ADP-102
  5P din T-pass adapter
• ADP-103
  6P minidin T-Pass adapter
• Operator's Manual
• SPC5010
  Desk/Wall holder for DLL5010
• STD5010
  Retail stand for DLL5010
• PG5 (110 Vac)
  Power supply unit
• PG5 (220 Vac)
  Power supply unit

*Power supply available on pin 9 or 25 of the connector.
**CAB342 SH1739 (cod. 90A051150) also available for Notebook and IBM SureOne cable, minidin connector.

General Specifications

POWER SUPPLY
4.75 to 14 Vdc (DLL5010-01); 5 Vdc ±10% (DLL50xx-Mx)

CONSUMPTION
100 mA @ 5 Vdc, 140 mA max.

OPERATION
Bidirectional retrocollective scanning

LIGHT SOURCE
Laser diode at 670 nm, 0.8 mW (G.P.); 0.39 mW (V.H.D.)

MAX. RESOLUTION
0.12 mm, 5 mils (G.P.); 0.06 mm, 2.5 mils (V.H.D.)

SCAN RATE
36 (±3) scans/sec.

MIN. PRINT CONTRAST RATIO
PCS = 15%

READING FIELD
See diagrams

READING ANGLE
Skew: ±60°
Pitch: 5 to 55°, -5 to -55°
Tilt: ±20°

READING INDICATORS
LED and adjustable tone "beeper"

READABLE BAR CODES
2/5 family, Code 39 (plus Code 32, Cip 39), EAN/UPC, EAN 128, Code 128, Code 93, CODABAR

PROGRAMMING METHOD
Manual: Reading special bar codes
Automatic (with RS232): S/W commands through the serial port
Sm@rtSet™ Windows configuration program

INTERFACES
RS232, Wedge (PC IBM AT/PS2, IBM SureOne, IBM terminals: 31xx, 32xx, 34xx, 37xx, 3153), pen emulation

DIMENSIONS
225 x 65.5 x 63 mm (8.86 x 2.58 x 2.48 in.)

WEIGHT (approx.)
180 g (6.35 oz.)

CASE MATERIAL
ABS

CABLE LENGTH
2 m (6.1 ft.) linear or coiled

LASER CLASSIFICATION
Class 2 (IEC 825-1 and CDRH) G.P.
Class 1 (IEC 825-1 and CDRH) V.H.D.

AMBIENT LIGHT CONDITIONS
Immune to light exposure in offices and facilities, and direct exposure to sunlight

OPERATING TEMPERATURE
0 to 40 °C (32 to 104 °F)

STORAGE TEMPERATURE
-20 to 60 °C (-4 to 140 °F

HUMIDITY
90% non condensing

DROP RESISTANCE
IEC 68-2-32 Test ED; resists repeated falls from 1.5 m onto a concrete surface

ENVIRONMENTAL PROTECTION
IP30

Wedge connection

Pen Emulation connection

Reading diagrams

General purpose models

Very high density models

Specifications subject to change without notice.

 

Call 513-984-2101 or 800-446-1991 for our current RACO discount price, quantity discounts and ordering information!

Back to Datalogic main

Back to hhr distance readers

RACO Industries has competitive prices and quality, guaranteed. View our Manufacturers Listing Page to see a listing of manufacturers with their products that we sell or visit our Home Page to learn more about the products that we carry and about RACO Industries. To hear our most recent low prices just call us at 513-984-2101 or 800-446-1991!

RACO Industries also carries a full line of barcoding printers, supplies, software and accessories. Call for more details!

© RACO Industries. Specifications and prices listed are subject to change without notice. All products and brand names are trademarks of their respective companies. All rights reserved.

© Datalogic Gryphon, USS unattended scanning, HHR hand-held readers, and PDC portable data collection products and systems are copyrights/trademarks of Datalogic.