cab XD4 Printer
The double sided
The cab XD4 printer is made for double sided printing with a
centered material guide. It has two stacked print engines
for simultaneous printing of front and back.
No adjustment of the print head for different widths of
material.
No drapery of ribbon.
For continuous or prefabricated materials like paper,
cardboard, textiles and synthetics.
The gap height at the material sensor for flat tubes and
synthetic tapes is up to 4mm.
The print speed for difficult printable materials is
reduced to 30 to 125mm/sec.
Operation and software are compatible with the A+ series.
cab XD4 Highlights
Big graphic display
White backlight guarantees clarity of display.
Ribbon retainer
The three-part tightening axles allow a fast and easy ribbon
exchange.
Easy adjustment
The print head is pressed down with two sliding toggles. One
is mounted to the left label margin, the other one is pushed
to the right label margin.
Material guide
Precise printing due to the material guide located directly
behind the print roller. The width is adjusted with a
spindle.
Peripheral connection
Add-on modules like cutter, external rewinder, present
sensor, peel-off adapter and applicators can be easily
connected via USB peripheral interface.
Solid, buckling
resistant metal chassis
It is made of dye-cast aluminum. All devices are assembled
to it.
Roll holder
For core diameters up to 38mm. For core diameters from 76mm
we include adapters for better winding.
The spring mounted margin stop ensures constant tension
while feeding and therefore a highly precise imprint.
Only one tool for all
maintenance tasks
The Allen key is located ready to hand directly at the
printer.
|
