APC Smart-UPS SC
Features and Benefits
Manageability

-
Network manageable
Monitor and control the UPS remotely via included PowerChute
software or APC Network Management Card (included in all models above
3kVA).
-
Audible alarms
Actively let you know if the unit is on battery, if the battery is
low or if there is an overload condition.
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery
that needs to be replaced.

-
Battery failure
notification
Provides early-warning fault analysis on batteries enabling timely
preventive maintenance
-
Serial connectivity
Provides management of the UPS via a serial port
-
LED status indicators
Enables quick understanding and response to visual indicators
showing UPS status.
-
InfraStruXure Manager
compatible
Enables centralized management via the APC InfraStuXure Manager
Economy
-
Boost and Trim
Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high
voltage conditions without using the battery.
-
Adjustable
voltage-transfer points
Maximizes useful battery life by widening the input voltage window
or tightening the output voltage regulation
-
Safety-agency approved
Ensures the product has been tested and approved to work safely
with the connected service provider equipment and within the specified
environment. UL, FCC, CE, C-Tick approvals.
Availability
-
Dataline Surge
Protection
Provides protection of connected equipment from power surges on
the data lines.
-
Power conditioning
Protects connected loads from surges, spikes, lightning, and other
power disturbances.
-
Intelligent battery
management
Maximizes battery performance, life and reliability through
intelligent, precision charging.
-
Automatic restart of
loads after UPS shutdown
Automatically starts up the connected equipment upon the return of
utility power.
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while
batteries are being replaced.
-
Resettable circuit
breakers
Enables a quick recovery from overload events.
APC
Smart-UPS® SC Runtime Chart
| Runtime
(hrs:mins) |
Products |
Part # |
| |
120V Output / 120V Input |
|
| 1:48 |
Smart-UPS
SC 420A 120V |
SC420 |
| 2:28 |
Smart-UPS
SC 450VA 120V - 1U rackmount/tower |
SC450RM1U |
| 3:03 |
Smart-UPS
SC 620VA 120V |
SC620 |
| 2:52 |
Smart-UPS
SC 1000VA 120V - 2U rackmount/tower |
SC1000 |
| 2:48 |
Smart-UPS
SC 1500VA 120V - 2U rackmount/tower |
SC1500 |
| |
230V Output/ 230V Input |
|
| 1:48 |
Smart-UPS
SC 420VA 230V |
SC420I |
| 2:28 |
Smart-UPS
SC 450VA 230V - 1U rackmount/tower |
SC450RMI1U |
| 3:03 |
Smart-UPS
SC 620VA 230V |
SC620I |
| 2:52 |
Smart-UPS
SC 1000VA 230V - 2U rackmount/tower |
SC1000I |
| 2:48 |
Smart-UPS
SC 1500VA 230V - 2U rackmount/tower |
SC1500I |
Smart-UPS
SC 420VA 120V
Features
APC
Smart-UPS SC, 260 watts / 420VA,
Input 120V / Output 120V, Interface Port DB9 RS232
Includes: cd with software, Smart UPS signaling RS232 cable, User
Manual.
Smart-UPS
SC 420
Specifications
Output
Output Power Capacity
260 Watts / 420
VA
Max Configurable Power
260 watts / 420 VA
Nominal Output Voltage
120V
Output Voltage Distortion
Less than 5% at
full load
Output Frequency (sync to
mains)
47 to 53 Hz for 50 Hz nominal, 57 to 63 Hz for 60 Hz nominal
Crest Factor
Up to 5:1
Output Connections
(4) NEMA 5-15R
Waveform Type
Stepped
approximation to a sinewave
Input
Nominal Input Voltage
120V
Input
Frequency
50/60Hz +/- 3Hz (auto sensing)
Input Connection Type
NEMA 5-15P
Cord Length
1.83 meters
Input Voltage Range for
Main Operations
82 - 144V
Input Voltage Adjustable
Range for Main Operations
75 - 154V
Batteries
and Runtime
Battery Type
Maintenance-free
sealed Lead-Acid battery with suspended electrolyte: leakproof
Typical Recharge Time**
5 hours
Replacement Battery
Cartridge
CURK2, RBC2, RBC2J
RBC Quantity
1
Typical Backup Time at
Half Load
13.5 minutes (130 watts)
Typical Backup Time at
Full Load
5.5 minutes (260 watts)
Communications & Management
Interface Port
DB-9 RS232
Control Panel
LED status
display with On Line: On Battery: Replace Battery: and Overload
indicators
Audible Alarm
Alarm when on
battery: distinctive low battery alarm: overload continuous tone alarm
Emergency Power Off (EPO)
Optional
Surge
Protection and Filtering
Surge Energy Rating
412
joules
Filtering
Full time
multi-pole noise filtering: 0.7% IEEE surge let-through: zero clamping
response time: meets UL 1449
Dataline Protection
RJ-11
Modem/Fax/DSL/10-100 Base-T Ethernet protection
Physical
Max Height
168.00 mm
Max Width
119.00 mm
Max Depth
368.00 mm
Net
Weight
10.00 KG
Shipping Weight
10.91 KG
Shipping Height
318.00 mm
Shipping Width
262.00 mm
Shipping Depth
508.00 mm
Color
Grey
Units per Palette
40.00
Environmental
Operating Temperature
0°
to 40°C
Operating Relative
Humidity
0 to 95%
Operating
Elevation
0 to 3000m
Storage Temperature
-15°
to 45°C
Storage Relative Humidity
0 to 95%
Storage Elevation
0 to 15000m
Audible Noise at 1 meter
from Surface of Unit
45 dBA
Online Thermal
Dissipation
50 BTU/hr
Conformance
Approvals
CSA, FCC A, Part
15 Class A, UL 1778
** The
time to recharge to 90% of full battery capacity following a discharge
to shutdown using a load rated for 1/2 the full load rating of the UPS.
Smart-UPS
SC 420VA 120V LIST Pricing:
| Part # |
Description |
List
Price
Call for Discounts! |
| SC420 |
Smart-UPS
SC 420VA 120V |
$168 |
Call
800-446-1991 or 513-984-2101 for the RACO Discount Price!