APC Smart-UPS SC 450VA 120V - 1U
Rackmount/Tower

APC Smart-UPS SC
Features and Benefits
Manageability
-
Network manageable
Monitor and control the UPS remotely via included PowerChute
software or APC Network Management Card (included in all models above
3kVA).
-
Audible alarms
Actively let you know if the unit is on battery, if the battery is
low or if there is an overload condition.
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery
that needs to be replaced.
-
Battery failure
notification
Provides early-warning fault analysis on batteries enabling timely
preventive maintenance
-
Serial connectivity
Provides management of the UPS via a serial port
-
LED status indicators
Enables quick understanding and response to visual indicators
showing UPS status.
-
InfraStruXure Manager
compatible
Enables centralized management via the APC InfraStuXure Manager
Economy
-
Boost and Trim
Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high
voltage conditions without using the battery.
-
Adjustable
voltage-transfer points
Maximizes useful battery life by widening the input voltage window
or tightening the output voltage regulation
-
Safety-agency approved
Ensures the product has been tested and approved to work safely
with the connected service provider equipment and within the specified
environment. UL, FCC, CE, C-Tick approvals.
Availability
-
Dataline Surge
Protection
Provides protection of connected equipment from power surges on
the data lines.
-
Power conditioning
Protects connected loads from surges, spikes, lightning, and other
power disturbances.
-
Intelligent battery
management
Maximizes battery performance, life and reliability through
intelligent, precision charging.
-
Automatic restart of
loads after UPS shutdown
Automatically starts up the connected equipment upon the return of
utility power.
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while
batteries are being replaced.
-
Resettable circuit
breakers
Enables a quick recovery from overload events.
APC
Smart-UPS® SC Runtime Chart
| Runtime
(hrs:mins) |
Products |
Part # |
| |
120V Output / 120V Input |
|
| 1:48 |
Smart-UPS
SC 420A 120V |
SC420 |
| 2:28 |
Smart-UPS
SC 450VA 120V - 1U rackmount/tower |
SC450RM1U |
| 3:03 |
Smart-UPS
SC 620VA 120V |
SC620 |
| 2:52 |
Smart-UPS
SC 1000VA 120V - 2U rackmount/tower |
SC1000 |
| 2:48 |
Smart-UPS
SC 1500VA 120V - 2U rackmount/tower |
SC1500 |
| |
230V Output/ 230V Input |
|
| 1:48 |
Smart-UPS
SC 420VA 230V |
SC420I |
| 2:28 |
Smart-UPS
SC 450VA 230V - 1U rackmount/tower |
SC450RMI1U |
| 3:03 |
Smart-UPS
SC 620VA 230V |
SC620I |
| 2:52 |
Smart-UPS
SC 1000VA 230V - 2U rackmount/tower |
SC1000I |
| 2:48 |
Smart-UPS
SC 1500VA 230V - 2U rackmount/tower |
SC1500I |
APC Smart-UPS SC, 280 watts/
450VA, Input 120V/ Output 120V, Interface Port DB9 RS232, Rack Height 1
U
Includes: cd with software,
rack mounting brackets, Smart UPS signaling RS232 cable, User Manual.
APC Smart-UPS SC 450
Specifications
Output
Output Power Capacity
280 watts/ 450 VA
Max Configurable Power
280 watts/ 450 VANominal
Output Voltage
120V
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 to 53 Hz for 50 Hz nominal, 57 to 63 Hz for 60 Hz nominal
Crest Factor
Up to 5:1
Waveform Type
Stepped approximation to a sinewave
Output Connections
(4) NEMA 5-15R
Input
Nominal Input Voltage
120V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
NEMA 5-15P
Cord Length
1.83 meters
Input Voltage Range for Main
Operations
82 to 144V
Input Voltage Adjustable Range for
Mains Operation
75 to 154V
Batteries and Runtime
Battery Type
Maintenance-free sealed lead-acid battery with suspended
electrolyte: leakproof
Typical Recharge Time
5 hour(s)
Replacement Battery Cartridge
CURK18, RBC18
RBC Quantity
1
Typical Backup Time at Half Load
19.4 minutes (140 watts)
Typical Backup Time at Full Load
5.9 minutes (280 watts)
Communications and
Management
Interface Port(s)
DB9 RS232
Control Panel
LED status display with On Line: On Battery: Replace Battery and
Overload indicators
Audible Alarm
Alarm when on battery: distinctive low battery alarm: overload
continuous tone alarm
Emergency Power Off (EPO)
Optional
Surge Protection and
Filtering
Surge Energy Rating
400 Joules
Filtering
Full time multi-pole noise filtering: 0.7% IEEE surge let-through:
zero clamping response time: meets UL 1449
Dataline Protection
RJ11 modem/fax protection (four wire dual line), RJ45 10/100 Base-T
Ethernet protection
Physical
Max Height
44.00 mm
Max Width
432.00 mm
Max Depth
385.00 mm
Rack Height
1U
Net Weight
10.77 kg
Shipping Weight
12.32 kg
Shipping Height
164.00 mm
Shipping Width
476.00 mm
Shipping Depth
589.00 mm
Color
Grey
Units per Pallet
24.00
Environmental
Operating Environment
0°C to 40°C
Operating Relative Humidity
0 to 95%
Operating Elevation
0-3000 meters
Storage Temperature
-15°C to 45°C
Storage Relative Humidity
0 to 95%
Storage Elevation
0-15000 meters
Audible Noise at 1 Meter from Surface
of Unit
38 dBA
Online Thermal Dissipation
38.00 BTU/hr
Conformance
Regulatory Approvals
CSA, FCC Part 15 Class A, UL 1778
** The time to recharge to 90% of full
battery capacity following a discharge to shutdown using a load rated
for 1/2 the full load rating of the UPS.
| Part # |
Description |
List
Price
Call for Discounts! |
| SC450RM1U |
Smart-UPS
SC 450VA 120V 1U rackmount/tower |
$240 |
Call
800-446-1991 or 513-984-2101 for the RACO Discount Price!
Specifications and pricing subject to
change without notice.